114
Scans available digital channels, and replaces
all the channels already stored in the channel
list with the scanned results.
1
Select “Replace Channels” in “Digital
Tuner,” and press ENTER.
2
Select “Next Screen,” and press ENTER.
3
Select your area using
<
/
,
, and press
ENTER.
The recorder scans available digital
channels and stores them.
To cancel the scan, press SYSTEM
MENU or EXIT.
If any programme positions are unused
or contain unwanted channels, you can
disable them (page 115).
b
Note
The timer settings for the replaced channels are
deleted.
Scans digital channels and adds found
channels to the channel list.
1
Select “Add New Channels” in “Digital
Tuner,” and press ENTER.
2
Select “Next Screen,” and press ENTER.
The recorder scans channels and stores
them.
To cancel the scan, press SYSTEM
MENU or EXIT.
After the programme positions have been set,
you can change the order of each programme
position in the displayed list.
1
Select “Channel Sort” in “Digital
Tuner,” and press ENTER.
2
Select “Next Screen,” and press ENTER.
3
Press
M
/
m
to select a programme
position you want to move, and press
ENTER.
• To display other pages, press
M
/
m
repeatedly.
4
Press
M
/
m
to select the programme
position number to swap for the one
selected in step 3, and press ENTER.
The programme position numbers are
swapped.
• To move other programme positions,
repeat from step 3.
Replace Channels
Your area
Select
New South Wales/
Australian Capital
Territory
NSW/ACT
Victoria
VIC
Queensland
QLD
South Australia
SA
Western Australia
WA
Tasmania
TAS
Northern Territory
NT
Add New Channels
Channel Sort
