87
Pl
ay
bac
k
Pausing a TV Broadcast
(TV Pause/Pause Live TV)
You can pause a current TV broadcast, and
record it on the HDD, then continue watching
the programme at a later time. This is useful
when you receive an unexpected phone call
or visitor while watching TV.
When connecting the recorder to your TV
using the SCART jack, do the followings.
– set “SMARTLINK” to “This Recorder
Only” in the “Options” setup (page 150).
– set “TV Pause” to “TV’s Tuner” in the
“Options 2” setup (page 150).
– preset programme positions by
downloading from your TV using
“Download from TV” of “Auto Channel
Setting” in the “Analog Tuner” setup
(page 133).
If you do not make the SCART connection,
set “TV Pause” to “Recorder’s Tuner” in the
“Options 2” setup (page 150).
1
While viewing a TV broadcast, press
TV PAUSE.
The picture pauses, and the recorder
starts recording the current TV channel
to the HDD.
It may take up to 10 seconds to start
recording.
2
Press
H
to resume watching the
programme.
You can fast forward/fast reverse, pause,
or stop the programme using
m
/
M
,
X
and
x
without affecting the recording.
3
Press
x
REC STOP to stop recording.
b
Notes
• The picture does not pause and the recorder starts
only recording in the following cases.
– when the programme positions are preset
differently between the recorder and the
connected TV.
– when watching the programme from the
external equipment connected to your TV.
• The picture tuned by the recorder pauses when
“TV Pause” is set to “Recorder’s Tuner” in the
“Options 2” setup (page 150).
• You may not be able to use the “TV Pause”
function depending on some TVs. For details,
refer to the operating instructions supplied with
your TV.
• The “TV Pause” function will not work correctly
when watching TV via the connected component
such as a VCR or digital tuner. The “TV Pause”
function works only with the channel selected on
the TV.
• You cannot use the “TV Pause” function as a
recording feature from the component (VCR,
etc.) connected to the LINE 1/DECODER jack.
• The “TV Pause” function will not work if the
connected TV does not comply with
SMARTLINK. To check whether your TV
complies with SMARTLINK, refer to the
operating instructions supplied with your TV.
HDD
m
H
/
X
/
x
x
REC
STOP
M
TV PAUSE
