148
Colour
Selects the method of outputting video
signals for the HDMI jack.
b
Notes
• Some settings may not be available depending on
the connected device.
• When a DVI device is connected, you cannot
select “YCbCr 4:2:2” or “YCbCr 4:4:4.”
• When “Screen Resolution” is set to “720 x 576i”
(or “720 x 480i”) in the “HDMI Output” setup,
you cannot select “YCbCr 4:2:2.”
Audio Output
Selects the type of audio signal output from
the HDMI OUT jack.
b
Notes
• The PCM signals may not be output even when
you select “Auto” depending on the “Audio Out”
settings, number of audio channels, and the
HDMI-connected device.
• The “Audio Output” function is not available
when a DVI device is connected.
HDMI Control
RGB (0-255)
Outputs RGB (0-255)
signals. Select this when
connecting to an RGB (0-
255) device.
RGB (16-235)
Outputs RGB (16-235)
signals. Select this if
colours appear overly rich
and the black appears too
deep.
YCbCr 4:2:2
Outputs 10-bit YCbCr
4:2:2 component signals.
YCbCr 4:4:4
Outputs 8-bit YCbCr
4:4:4 component signals.
Auto
Outputs Dolby Digital,
MPEG and DTS audio
signals as a bitstream
signal. Normally select
this position.
PCM
Converts all audio signals
except for DTS signals to
PCM.
Bitstream
Priority
Select this if the
connected device is
compatible with bitstream
audio.
On
Allows you to use the
HDMI control features
(page 21).
Off
Turns off the function.
