77
G
U
ID
E
P
lu
s+
(F
o
r sa
te
ll
it
e
, ca
b
le
, te
rr
e
str
ia
l u
se
rs
o
n
ly
)
If you are using connection B (page 17) and
you want to receive the programme guide
data from your set top box receiver, search
for the host channel on the following website
and set it for your area, following the steps
below:
www.europe.guideplus.com
1
Press GUIDE
.
The GUIDE Plus+ system appears.
2
Select “Setup” in the Menu Bar.
The GUIDE Plus+ setup menu appears.
3
Select “Host Channel Setup” using
M
/
m
, and press ENTER.
4
Press the yellow button (“Change”)
twice.
“Manual” appears.
5
Select “Source” using
,
.
6
Press the yellow button (“Source”)
repeatedly to select the input source.
7
Select “Prog. No.” using
,
.
8
Enter the programme position number
using the number buttons.
9
Press the green button (“Save”).
The display asks for confirmation.
10
Select “Confirm” using
<
/
,
, and
press ENTER.
The display returns to the GUIDE Plus+
setup menu.
11
Wait one day until the programme
guide data can be received.
To cancel the settings
Press the red button (“Back”).
To return to the “Home” position
Press the blue button (“Home”).
The cursor returns to the home position on the
“Grid.”
To check the GUIDE Plus+ system
information
1
Press GUIDE
.
2
Select “Setup” in the Menu Bar, and
press ENTER.
3
Select “GUIDE Plus+ system
Information” using
M
/
m
, and press
ENTER.
Check whether programme position numbers
are the same as the programme position
numbers set in the “Programme Setting.”
If you want to make adjustments to the
channel settings or change the channel name,
see “Programme Setting” in “Settings and
Adjustments” (page 130).
1
Select “Editor” in the Menu Bar.
2
Press ENTER.
3
Press
,
to move the cursor to the
right column.
4
Select the programme position you
want to check using
M
/
m
.
To change the input source, press the red
button (“Source”).
To change the programme position, see
“Programme Setting” on page 131.
Changing the GUIDE Plus+ host
channel manually
Checking programme positions
,
continued
