19
H
ook
up
s and
Se
tti
n
gs
Step 3: Connecting the Audio Cords/HDMI Cord
Select one of the following patterns,
A
or
B
, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver). This will enable you to listen
to sound.
* The yellow plug is used for video signals (page 16).
A
Digital audio input jack
If your audio component has a Dolby
*1
Digital, DTS
*2
, or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.
If you connect a Sony audio component that
is compatible with the HDMI control
function, refer to the operating instructions
supplied with the audio component.
VIDEO
AUDIO
INPUT
L
R
A
B
Audio component with
a decoder
(white)
TV, projector, or
audio component
Audio/video cord
(not supplied)
: Signal flow
Coaxial digital cord
(not supplied)
to DIGITAL OUT (COAXIAL)
to LINE 2 OUT (R-AUDIO-L)
Rear (L)
DVD recorder
(red)
(yellow)
*
(yellow)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
to coaxial/HDMI digital input
Rear (R)
Front (R)
Subwoofer
Centre
HDMI cord
(not supplied)
to HDMI OUT
or
,
continued
