24
Setting Up the VCR
Plus+
®
System
Setting up your recorder involves
coordinating the TV channel number (the
number you turn to on your TV or recorder to
watch a program) with the guide channel (the
number that’s assigned to that channel in
your TV program guide). Note that this
feature may not be available in some areas.
To find the guide channel numbers, look at
the “Channel Line-up Chart” in the program
guide for your area that features PlusCode
numbers.
Use the Channel Line-up Chart to coordinate
the guide channel number with the TV
channel number. For example, if HBO is
listed in the Channel Line-up Chart as
channel 33, and the recorder receives HBO
on channel 5, coordinate these numbers using
the following procedure.
1
Press SYSTEM MENU while the
recorder is stopped.
2
Select “SETUP,” and press ENTER.
3
Select “Basic,” and press ENTER.
4
Select “Set VCR Plus+ Channels,” and
press ENTER.
5
Select “- -,” and press ENTER.
6
Enter the guide channel number
assigned in the program guide using
the number buttons, and press
,
.
7
Enter the TV channel number using the
number buttons, and press SET.
If you made Hookup A (page 13) or
Hookup C (page 15), enter the TV
channel number on your cable box.
If you made Hookup B (page 14), enter
the cable box output channel. See the
instructions supplied with your cable box
to confirm the cable box’s output
channel.
<
/
M
/
m
/
,
,
ENTER
SYSTEM
MENU
Number
buttons,
SET
