18
Step 3: Connecting the Audio Cords
Select one of the following patterns,
A
or
B
, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). This will enable you to listen to sound.
A
Digital audio input jack
If your AV amplifier (receiver) has a Dolby
*1
Digital or DTS
*2
decoder and a digital input
jack, use this connection. You can enjoy
Dolby Digital (5.1ch) and DTS (5.1ch)
surround effects.
B
Audio L/R (left/right) input jacks
This connection will use your TV’s or stereo
amplifier’s (receiver’s) two speakers for
sound.
VIDEO
AUDIO
INPUT
L
R
A
B
AV amplifier (receiver)
with a decoder
(white)
TV, projector, or AV
amplifier (receiver)
Audio/video cord
(supplied)
: Signal flow
to LINE OUT (R-AUDIO-L) 1 or 2
Rear (L)
DVD recorder
(red)
(yellow)
*
(yellow)
(white)
(red)
[Speakers]
Front (L)
[Speakers]
Rear (R)
Front (R)
Subwoofer
Center
Optical digital cord (not supplied)
to optical digital input
to DIGITAL OUT (COAXIAL or OPTICAL)
Coaxial digital cord (not supplied)
or
to coaxial digital input
* The yellow plug is used for video signals (page 16).