39
T
im
er R
ec
ord
ing
Timer Recording (Standard/
ShowView)
You can set the timer for a total of 30 programmes,
up to one month in advance.
There are two methods to set the timer: the
standard method and ShowView method.
• Standard: Set the date, time, and programme
position of the programme manually.
• ShowView: Enter the ShowView number
designated for each TV programme (page 41).
Note that this function may not be available in
some areas.
1
Press
[TIMER]
.
• If the “Timer – ShowView” display appears,
press
<
to switch the display to
“Standard”.
2
Select an item using
<
/
,
and adjust
using
M
/
m
.
“Date”: Sets the date.
The item changes as follows:
Today
y
Tomorrow
y
……
y
Thu
28.10 (1 month later)
y
Sun (every Sunday)
y
……
y
Sat (every Saturday)
y
Mon-Fri (Monday to Friday)
y
Mon-Sat
(Monday to Saturday)
y
Sun-Sat (Sunday to
Saturday)
y
Today
“Start”: Sets the start time.
“Stop”: Sets the stop time.
“Prog.”: Selects the programme position or
input source.
“Media”: Selects the media, HDD or DVD.
“Mode”: Selects the recording mode
(page 37).
• If you want to change the setting for the
Update function, select “Details” and press
ENTER. Select an item using
<
/
,
and set
using
M
/
m
.
“Update” (HDD only): Automatically records
over a previously recorded program that is set
to be recorded daily or weekly.
To return to the Timer programming menu,
select “Previous” and ENTER.
• If you make a mistake, select the item and
change the setting.
Setting the timer manually
(Standard)
+
RW
-RW
VR
-RW
Video
-
R
+
R
HDD
1
2
3
4
6
7
8
9
0
5
<
/
M
/
m
/
,
,
ENTER
[TIMER]
x
REC STOP
TOOLS
Timer - Standard
Set the timer manually.
Cancel
ShowView
Date
:
Start
:
Stop
OK
Prog.
Media Mode
Today
Details
Off
Update
,
continued
