background image

35

E

igh
t Bas

ic

 Op
erat

ions
 —
 Ge
tt

in

g to Kno

w You

D

V

D

 Re
cor
der

3

Select a title, and press ENTER.

The sub-menu appears.
The sub-menu displays options 
applicable only to the selected item. The 
displayed options differ depending upon 
the model, situation, and disc type.

4

Select “Play,” and press ENTER.

Playback starts from the selected title.

To stop playback

Press 

x

 (stop).

To scroll the list display by page (Page 
mode)

Press 

/

 while the list display is turned 

on. Each time you press 

/

, the entire 

Title List changes to the next/previous page 
of titles. 

About the Title List for HDD/DVD-RWs/
DVD-Rs (VR mode)

You can switch the Title List to show 
Original or Playlist titles.
While the Title List menu is turned on, press 

<

/

,

.

To change the title order (Sort)

While the Title List menu is turned on, press 
OPTIONS to select “Sort Titles.” Press 

M

/

m

to select the item, and press ENTER.

To change a title thumbnail picture 
(Thumbnail) (HDD/DVD-RW/DVD-R in VR 
mode only)

You can select a favourite scene for the 
thumbnail picture shown in the Title List 
menu.

1

Press TITLE LIST.
Press 

<

/

,

 to switch the Title Lists, if 

necessary.

2

Select a title, and press ENTER.
The sub-menu appears.

3

Select “Set Thumbnail,” and press 
ENTER.
The display for setting the thumbnail 
point appears and the title starts to play.

4

While watching the playback picture, 
press 

m

/

M

 to select the scene you 

want to set for a thumbnail picture, and 
press ENTER.
Playback pauses.

5

Press ENTER if the scene is correct. 
If the scene is incorrect, press 

c

/

C

 to 

select the scene you want to set for a 
thumbnail picture, and press ENTER.
The display asks for confirmation.
• To change the thumbnail, press 

M

.

6

Select “OK,” and press ENTER.
The scene is set for the title’s thumbnail 
picture.

Sub-menu

Order

Sorted

By Date

In order of when the titles 
were recorded. The title that is 
recorded most recently is 
listed at the top.

By Title

In alphabetical order.

By Number

In order of recorded title 
number.

Unseen Title 
(HDD only)

In order of when the titles 
were recorded. The title that is 
recorded most recently and 
has not been played is listed at 
the top. Playlist titles are not 
displayed.

,

continued

Summary of Contents for RDR-HX525





























































































































Reviews: