86
4
Press the number buttons or
<
/
M
/
m
/
,
to
enter the TV guide page number, and press
ENTER to confirm the setting.
• If you make a mistake, press CLEAR to re-
enter the correct number.
To set or change another TV guide page
number, repeat steps 3 and 4 above.
z
Hint
To view Teletext information on your TV screen during
a broadcast, switch to your TV’s tuner by pressing
t
TV/VIDEO.
b
Notes
• In step 4 above, enter “000” if you do not want to use
the TV guide page number for automatic labelling. The
recorder will instead store a default title name
(programme position, start time - stop time).
• Refer to the Teletext information on your TV screen to
obtain the TV guide page number with programme
titles and their start times.
• If the Teletext TV guide has a page which always
shows the programmes for the current day, this page
should be input for all days.
• If you start recording more than three minutes before
the programme is scheduled to start, the correct label
information may not be transferred.
• Note that this function may not work correctly with
programmes broadcast from some stations.
• If the broadcast system updates the Teletext
information at the moment recording starts, the title
label may not correspond to the recorded programme.
In this case, you may have to manually enter the correct
title (page 36).
Auto Adjust
Turns on the Auto Clock Set function when a channel
in your local area broadcasts a time signal.
1
Select “Clock” in “Settings,” and press
ENTER.
2
Select “Auto Adjust,” and press ENTER.
3
Select “On,” and press
,
.
4
Press
M
/
m
repeatedly until the programme
position of the station that carries a time signal
appears, and press ENTER.
• If the recorder does not receive a time signal
from any station, “Auto Adjust” returns to
“Off” automatically and the menu for setting
the clock manually appears on the screen.
z
Hint
If you set “Auto Adjust” to “On,” the Auto Clock Set
function is activated whenever the recorder is turned off.
b
Note
The Auto Clock Set function does not work while the
recorder is standing by for Synchro-Recording.
To set the clock manually
If the Auto Clock Set function did not set the clock
correctly for your local area, try another station for
the Auto Clock Set function or set the clock
manually.
1
Select “Clock” in “Settings,” and press
ENTER.
2
Select “Auto Adjust,” and press ENTER.
3
Select “Off,” and press ENTER.
4
Select “Present Time,” and press ENTER.
5
Press
M
/
m
to set the day, and press
,
.
Set the month, year, hour, and minutes in
sequence. Press
<
/
,
to select the item to be
set, then press
M
/
m
to set the numbers. The
day of the week is set automatically.
To change the numbers, press
<
to return to
the item to be changed, and press
M
/
m
.
6
Press ENTER to start the clock.
Clock
Settings - Clock
Auto Adjust :
Present Time :
1. 1. 2004. 21:39
Thu
Off
1
Settings - Clock
Auto Adjust :
Present Time :
1. 1. 2004. 21:39
Thu
On
1
Settings - Clock
Auto Adjust :
Present Time :
1. 1. 2004. 21:39
Thu
Off
1
Clock - Present Time
Set the time and date manually.
0 00
:
1
2005
Sat 1
