Sony RDR-GX7 Page 26 Operating Instructions Manual Download

Page: 26 / 112

Setting Up the Remote

To check the channel settings

When displaying the “Set VCR Plus+ Channels” menu, press

to select “Channel List,” then press ENTER.

The display lists the channels whose guide channel number is not
as same as the TV channel number.

To go to the next page, press

To return to the previous page, press

Setting Up the Remote

You can control your TV with the supplied remote by adjusting
the remote control’s signal.
If you connected the recorder to an AV amplifier (receiver), you
can also control the volume with the supplied remote.

Notes

• Depending on the connected unit, you may not be able to control your

TV or AV amplifier (receiver) with some or all of the buttons below.

• If you enter a new code number, the code number previously entered

will be erased.

• When you replace the batteries of the remote, the code number may be

reset to the default setting. Set the appropriate code number again.

Controlling TVs with the remote

Slide the TV/DVD switch to TV.

Hold down

[

Enter your TV’s manufacturer code (see
“Code numbers of controllable TVs” below)
using the number buttons.

Release

[

When the TV/DVD switch is set to TV, the remote
performs the following:

Settings - VCR Plus+ Channel List

Guide CH

TV CH

121

Guide CH

TV CH

- -

Page2

[

Turns your TV on or off

VOL +/–

Adjusts the volume of your TV

CH +/–

Selects the channel on your TV

WIDE MODE

Switches to or from the wide mode of a
Sony wide-screen TV

TV/VIDEO

Switches your TV’s input source

Number buttons and
SET

Selects the channel on your TV

TV/DVD switch

VOL +/–

Number buttons,
SET

TV/VIDEO

WIDE MODE

CH +/–

Summary of Contents for RDR-GX7

















































































































Search results

Summary of Contents for RDR-GX7

Reviews:

Related manuals for RDR-GX7

Brands by name

Popular brands

Sony RDR-GX7, Operating Instructions Manual

Search results

Summary of Contents for RDR-GX7

Reviews:

Related manuals for RDR-GX7

Brands by name

Popular brands