69
Se
tti
n
gs
a
nd
Adj
u
st
m
e
n
ts
Language Settings
The [Language] setup allows you to select a
language for the recorder’s display and discs.
Select
[Language] in the Setup Display. To use
the display, see “Using the Setup Displays”
(page 65).
The default settings are underlined.
[Display Menu]
Switches the display language on the screen.
[Disc Menu] (DVD VIDEO only)
Switches the language for the DVD menu.
[Disc Audio] (DVD VIDEO only)
Switches the language of the sound track.
[Disc Subtitle] (DVD VIDEO only)
Switches the language of the subtitles recorded on
the disc.
b
Note
If you select a language in [Disc Menu], [Disc Subtitle],
or [Disc Audio] that is not recorded on the DVD VIDEO,
one of the recorded languages will be automatically
selected.
Audio Settings
The [Audio] setup allows you to adjust the sound
according to the playback and connection
conditions.
Select
[Audio] in the Setup Display. To use the
display, see “Using the Setup Displays” (page 65).
The default settings are underlined.
[Dolby Digital Output] (DVDs only)
Selects the type of Dolby Digital signal.
b
Note
This affects the output from the DIGITAL OUT
(COAXIAL)/HDMI OUT jacks.
If the HDMI OUT jack is connected to equipment not
compatible with Dolby Digital signals, select [Dolby
Digital
t
PCM].
[DTS Output] (DVD VIDEO only)
Selects whether or not to output DTS signals.
[ Original ]
Selects the language given
priority in the disc.
[ Others ]
The display for entering a
language code appears. Press the
number buttons to enter a four-
digit code number from
“Language Code List” (page 83)
and press ENTER.
[ Off ]
Turns off the subtitles.
Cesky
Deutsch
Magyar
Italiano
Polski
Display Menu
Disc Menu
Disc Audio
Français
Nederlands
English
Disc Subtitle
[ Dolby
Digital
t
PCM ]
Select this when the recorder is
connected to an audio
component without a built-in
Dolby Digital decoder.
[ Dolby
Digital ]
Select this when the recorder is
connected to an audio
component with a built-in
Dolby Digital decoder.
[ Off ]
Select this when the recorder is
connected to an audio
component without a built-in
DTS decoder.
[ On ]
Select this when the recorder is
connected to an audio
component with a built-in DTS
decoder.
Dolby Digital Output
DTS Output
MPEG Output
Dolby Digital -> PCM
Dolby Digital
96kHz PCM Output
Audio DRC
Vocal
,
continued