Sony RDR-GX360, Operating Instructions Manual

Page: 51 / 128

Re
co
rd
in
g
51
US
Timer Recording From
Connected Equipment
You can set the timer for a total of 12 programs, up
to one month in advance.
Note that the maximum continuous recording time
for a single title is 12 hours. Contents beyond this
time will not be recorded.
If you record from connected equipment that has a
timer function, you can use the Synchro Rec
function (page 54).
Notes
• Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent
the accurate recording of a program.
• To play a disc recorded with this recorder on other
equipment, finalize the disc (page 66). If you set “Auto
Finalize” to “On” in the “Features” setup (page 85), the
Auto Finalize function works for DVD-RWs (Video
mode), DVD-Rs (Video mode) and DVD+Rs after
recording. For details, see page 67.
1
Press Z OPEN/CLOSE, and place a
recordable disc on the disc tray.
2
Press Z OPEN/CLOSE to close the disc
tray.
Wait until “LOAD” disappears from the front
panel display.
Unused discs are automatically formatted. For
the DVD-RW/DVD-R’s recording format
(VR mode or Video mode), see “Formatting a
new disc” on page 48.
3
Press TIMER.
4
Select an item using
<
/
,
and adjust
using M / m .
A
“Date”: Sets the date using M .
To record the same program every day or
the same day every week, press
m
.
The item changes as follows:
Today
y
Sun-Sat (Sunday to Saturday)
y
Mon-Sat (Monday to Saturday)
y
Mon-Fri (Monday to Friday)
y
Sun
(every Sunday)
y
Mon (every Monday)
y
…
y
Sat (every Saturday)
y
1 month later
y
…
y
Today
B
“Start”: Sets the start time.
C
“End”: Sets the stop time.
D
“Ch”: Selects the channel or input
source.
• When using the cable box/satellite
receiver control, select the channel.
• When not using the cable box/satellite
receiver control, select the input, LINE1
or LINE2. Select the channel on the
connected cable box/satellite receiver’s
side before the timer recording starts.
E
“Mode”: Selects the recording mode
(page 47).
To use the Rec Mode Adjust function
(page 52), select “AUTO.”
If you make a mistake, select the item and
change the setting.
+
RW + R -RW
VR
-RW
Video
-R
VR
-R
Video
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8
0 0
9 9
M / m / < / , ,
ENTER
Z OPEN/
CLOSE
x STOP
SYSTEM
MENU
TIMER
Recording side facing down
01 DVD 04/15 09:00PM 10:00PM CH8
--- --/-- --:-- --:-- ---- --- 04
--- --/-- --:-- --:-- ---- --- 05
--- --/-- --:-- --:-- ---- --- 06
03 --- --/-- --:-- --:-- ---- ---
02 DVD 04/30 09:15PM 09:45PM CH11
10:10 AM
No Rec To Date Start End Source Mode Edit
Timer – Standard
No.1
:
PM PM
:
09 00 10 00 Line1 SP
1 2 3 4 5
Date Start End Ch Mode
Today
, continued