000
31
3. Settings and Adjustments
Format Settings
You can set the file system, system frequency, and video format using Operation >Format in the setup
menu.
For details about menu operations, see “Basic Setup Menu Operations” (page 85).
Selecting the File System
You can select exFAT or UDF for the file system.
1
Select Operation >Format >File System in the setup menu.
2
Turn the MENU knob to select exFAT or UDF, and press the knob.
A confirmation screen appears.
3
Select [Execute] to execute, or select [Cancel] to cancel, and then press the MENU knob.
The camcorder will reboot automatically after executing [Execute].
[Note]
The file system cannot be changed during recording/playback or while the thumbnail screen is displayed.
Switching the System Frequency
You can switch the system frequency as required.
[Notes]
ˎ
ˎ
The system frequency cannot be changed during recording/playback or while the thumbnail screen is displayed.
ˎ
ˎ
After switching between 29.97 and 59.94 or between 25 and 40, the camcorder does not reboot automatically.
1
Select Operation >Format >Frequency in the setup menu.
2
Turn the MENU knob to select the system frequency, and press the knob.
A confirmation screen appears.
3
Select [Execute] to execute, or select [Cancel] to cancel, and then press the MENU knob.
The camcorder will reboot automatically after executing [Execute].
Switching the Video Format
Refer to “Video Formats” (page 32) as required when switching the video format.
1
Select Operation >Format >Rec Format in the setup menu.
2
Turn the MENU knob to change the video format, and press the knob.
A confirmation screen appears.
3
Select [Execute] to execute, or select [Cancel] to cancel, and then press the MENU knob.
