000
7. Menu Display and Settings: Menu List
107
Maintenance >Basic Authentication
Makes settings related to basic authentication.
Item
Setting
Description
User Name
(Displays the current user name.) Sets the user name (arbitrary name for basic
authentication). Set to “admin” by factory default.
Password
*******
Sets the password (for basic authentication). Set
to “pxw-z450” by factory default.
Maintenance >Network
Makes settings related to network connections.
Item
Setting
Description
Setting
On/
Off
Turns the network function on/off.
Wireless Network
Wi-Fi Access Point/Wi-Fi Station/
Modem/
Off
Sets the operating mode for wireless LAN
connections.
NFC
Execute/
Cancel
Initiates a one-touch connection using NFC
(execute by selecting Execute).
WPS
Execute/Cancel
Starts Wi-Fi Protected Setup (WPS) (execute by
selecting Execute).
Channel
Auto(5GHz)/
Auto
/CH1/CH2/
CH3/CH4/CH5/CH6/CH7/CH8/
CH9/CH10/CH11
Sets the wireless LAN channel.
[Note]
“Auto(5GHz)” may not be displayed, depending on the
wireless LAN module used.
SSID & Password
(SSID display)
(Password display)
Displays the SSID and password.
Device Name (Wireless)
Displays the name of network device attached to
the USB wireless LAN module connector
IP Address (Wireless)
Displays the IP address when connected to a
wireless LAN.
Subnet Mask (Wireless)
Displays the subnet mask when connected to a
wireless LAN.
MAC Address (Wireless)
Displays the MAC address of the USB Wireless LAN
Module attached to the camcorder.
Regenerate Password
Execute/Cancel
Regenerates a password (execute by selecting
Execute).
Wired LAN
Enable/
Disable
Enables/disables wired LAN connection.
Wired LAN Remote
On/
Off
If connected to a network using a LAN cable,
operation from a Wi-Fi remote control, web
menu, and “Content Browser Mobile” is enabled.
Maintenance >Network
Makes settings related to network connections.
Item
Setting
Description
Wired LAN Detail
Settings
DHCP (
On
/Off)
Enables/disables DHCP.
When set to On, an IP address is automatically
assigned to the camcorder.
To enter the camcorder IP address manually, set
to Off.
IP Address (DHCP/On:
obtain
automatically
, DHCP/Off:
192.168.2.50
)
Enter the IP address of the camcorder.
Enabled only when DHCP is Off.
Subnet Mask (DHCP/On:
obtain
automatically
, DHCP/Off:
255.255.255.0
)
Enter the subnet mask of the camcorder.
Enabled only when DHCP is Off.
Gateway (DHCP/On:
obtain
automatically
, DHCP/Off:
0.0.0.0
)
Enter the gateway for the access point.
Enabled only when DHCP is Off.
DNS Auto (
On
/Off)
Enables/disables automatic DNS.
When set to On, the address of the DNS server is
obtained automatically.
Primary DNS Server (DNS Auto/
On:
obtain automatically
, DNS
Auto/Off:
0.0.0.0
)
Enter the primary DNS server for the router.
Enabled only when DNS Auto is Off.
Secondary DNS Server (DNS
Auto/On:
obtain automatically
,
DNS Auto/Off:
0.0.0.0
)
Enter the secondary DNS server for the router.
Enabled only when DNS Auto is Off.
Maintenance >Network Client Mode
Makes settings related to network client mode.
[Note]
Network client mode cannot be set if values are not entered for all items.
Item
Setting
Description
Setting
On/
Off
Turns network client mode on/off.
[Note]
When set to On, the firmware version cannot be
updated.
