000
7. Menu Display and Settings: Menu List
104
Maintenance >WRR Setting
Makes settings related to the wireless tuner.
Item
Setting
Description
TX LCF Frequency
---
Sets the low cut filter frequency of the transmitter
whose signals are being received on the channel
selected by WRR CH Select. (The setting range
varies depending on the transmitter.)
TX System Delay
Auto
/0.0ms to 8.0ms
Sets the amount of audio delay.
Auto: Automatically corrects for the amount of
delay so that the delay in the audio from the
wireless tuner is zero.
0.0ms to 8.0ms: Sets the amount of estimated
wireless system delay, for cases in which
several wireless systems are being used via a
device such as an audio mixer.
TX RF Power
High (Power value) mW/Mid
(Power value) mW/Low (Power
value) mW
Sets the RF power level of the transmitter
communicating on the channel selected by WRR
CH Select. (The setting range varies depending on
the transmitter.)
TX Power Save
Active/Sleep
Sets the power saving mode of the transmitter
whose signals are being received on the channel
selected by WRR CH Select.
Active: Set the transmitter to startup mode.
Sleep: Set the transmitter to power saving mode.
Maintenance >Time Code
Makes settings related to timecode.
Item
Setting
Description
TC Out
Auto
/Generator
Selects the timecode output.
Auto: Outputs the timecode generator value
during recording, and the timecode reader
value during playback.
Generator: Outputs the timecode generator value
during recording and playback.
DF/NDF
DF
/NDF
Selects drop-frame mode (DF) or non-drop-frame
mode (NDF).
LTC UBIT
Fix
/Time
Sets the data recorded in LTC user bits.
Fix: Records user-specified data.
Time: Records the current time.
Maintenance >Time Code
Makes settings related to timecode.
Item
Setting
Description
Counter Display
Counter
/Duration
Select the method used to reset the counter value
displayed on the viewfinder screen.
Counter: Continue to increment until the RESET
button is pressed.
Duration: Reset each time that recording is
started.
Maintenance >Essence Mark
Makes settings related to essence marks.
Item
Setting
Description
Find Mode
Clip
/Rec Start
Sets the operation when the NEXT/PREV button is
pressed.
Rec Start: Moves to the next or the previous
recording start mark, respectively.
Clip: Moves to the start of the next clip when the
NEXT button is pressed. Moves to the start of
the current clip when the PREV button is
pressed (or moves to the start of the previous
clip if the PREV button is pressed at the start
of the clip).
Maintenance >Camera Config
Makes settings related to various camcorder operations.
Item
Setting
Description
HD SDI Remote I/F
Off
/Characters/
Green Tally/Red Tally
Sets whether to enable the recording control
function for an external device connected to the
SDI OUT 1/2 connector (HD SDI output) of the
camcorder. If enabled, it selects the indicator used
to display the recording state of the external
device.
Off: Recording control function is disabled.
Chara: Displayed using the external device control
indicator on the status display in the
viewfinder.
G-Tally: Displayed using the TALLY indicator
(green tally) in the viewfinder.
R-Tally: Displayed using the REC indicator
(recording red tally) in the viewfinder.
Color Bars Select
ARIB
/100%/75%/SMPTE
Selects the color bar type.
User Menu Only
On/
Off
Selects whether to display the User menu only
(On) or display the menu list (Off) when the
camcorder is displaying the menu.