72
When you press the THUMBNAIL button
, clips recorded on the SxS memory card are
displayed as thumbnails on the screen.
You can select a clip on the thumbnail screen and start playback of that clip. The playback picture can be
seen on the LCD/viewfinder screen and external monitors.
Pressing the THUMBNAIL button again closes the thumbnail screen and returns to the camera image.
Note
• Only the clips recorded in the currently selected recording format are displayed on the thumbnail screen. If an expected
recorded clip is not displayed, check the recording format. Take special note of this fact before formatting (initializing)
media.
Information for the clip at the cursor position is displayed at the bottom of the screen.
1.
Thumbnail (index picture)
Displays the index picture of a clip. When a clip
is recorded, its first frame is automatically set as
the index picture.
Clip/frame information is displayed below the
thumbnail. You change the information
displayed using Customize View
>Thumbnail Caption in the Thumbnail menu.
2.
Clip name
Displays the name of the selected clip.
3.
Recording video format
Displays the file format of the selected clip.
4.
Special recording information
Displays the recording mode only if the clip was
recorded using a special recording mode.
For Slow & Quick Motion clips, the frame rate
is displayed on the right.
5.
Clip duration
6.
Creation date
Thumbnail Screen
Configuration of the Thumbnail Screen
Clip number/Total number of clips
Cursor
(yellow)
Currently selected SxS memory card indicator
(A lock icon is displayed if the card is protected.)
