67
You can stream video and audio that is recorded
or played back by the camcorder with low latency
using RTMP (Real Time Messaging Protocol)
developed by Adobe Systems Incorporated.
RTMPS, encrypted using SSL, is also supported.
Note
• The NETWORK upgrade license (option) is required
to use this function.
Setting the RTMP/RTMPS streaming
destination and format
1
Select RTMP/RTMPS >RTMP Settings
Select >RTMP Settings1 (or RTMP
Settings2, RTMP Settings3) in the
Network menu.
The RTMP/RTMPS streaming connection
destination setup screen appears.
2
Set each item on the connection
destination setup screen.
Display Name
Set the display name in the RTMP Settings
menu.
Streaming Format
Set the format of the video to stream.
• 1920×1080 9M
• 1920×1080 6M
• 1280×720P 3M
• 640×360P 1M
Destination URL
Set the URL of the RTMP server to connect.
URLs that begin with “rtmps://” are
identified as RTMPS streaming, and the
streaming data is encrypted. Accordingly, a
certificate is required for RTMPS
connections.
Stream Name
Set the streaming channel name that is
distributed from the streaming server.
RTMPS Certificate
This item must be configured to use RTMPS
streaming.
Configure the certificate for RTMPS
connection.
• Load
Import a certificate.
* The certificate to be loaded must be in PEM
format, and should be written to the root
directory of the SD card with
“RTMPS_certification.pem” file name.
• Clear
Clear the certificate.
• None
Do not load or clear a certificate.
3
When finished, select Set to apply the
settings.
Always select Set after changing the settings.
The settings are not applied if Set is not
selected.
Notes
• Set the clock of the camcorder to the correct time
before importing a certificate for RTMPS
connections.
• When recording in XAVC-I 3840×2160P 59.94/
50P, Load cannot be selected.
• In low voltage state, Load/Clear cannot be
selected for an RTMPS connection certificate.
RTMPS Certificate Status
Displays the load status of the RTMPS
connection certificate.
Load Utility SD/MS
Load the Display Name, Destination URL,
and Stream Name information for RTMP/
RTMPS stored on the media inserted in the
UTILITY SD/MS slot.
Note
• A public key is required to create a file for loading
the Display Name, Destination URL, and Stream
Name.
Save the public key on an SD card using Network
Public Key >Key Export
in the File
menu. Use the saved public key to create the file
to load using the “Streaming Setting Transfer”
application software.
Reset
Reset the settings to the defaults.
1
Connect the camcorder to the Internet
or local network as described in
Transmitting RTMP/
RTMPS Streaming Video
and Audio
Starting RTMP/RTMPS streaming
