Sony PXW-Z150 XDCAM Operating Manual Download

Page: 121 / 152

121

rou
bl

oot
in

Time code and other information appear on the display of the connected
device.

• Set [DISPLAY OUTPUT] to [LCD PANEL] (p. 109).

Sound cannot be added after recording.

• You cannot add sound after recording on your camcorder.

Copy cannot be done correctly using the HDMI cable.

• You cannot copy movies using the HDMI cable.

The computer does not recognize the camcorder.

• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from your computer and camcorder. Reboot your computer, and

connect your computer and camcorder following the steps in the correct order.

Movies cannot be viewed or copied to the computer.

• Disconnect the cable from the computer, then connect it again.
• Software must be installed to copy movies to your computer (p. 20).

Copying/Editing/Connecting to other devices

Connecting to a computer

Summary of Contents for PXW-Z150 XDCAM

























































































































































Search results

Summary of Contents for PXW-Z150 XDCAM

Reviews:

Related manuals for PXW-Z150 XDCAM

Brands by name

Popular brands

Sony PXW-Z150 XDCAM, Operating Manual

Search results

Summary of Contents for PXW-Z150 XDCAM

Reviews:

Related manuals for PXW-Z150 XDCAM

Brands by name

Popular brands