69
2
Format the unusable SxS memory card on
the camcorder.
3
Copy the required clips back to the newly
formatted SxS memory card.
Recording and playback during restoration
Even while restoration is in progress, you can
record and play an SxS memory card in the other
card slot.
Note
For restoration of media recorded with this camcorder,
be sure to use this camcorder.
Media recorded with a device other than this camcorder
or with another camcorder of different version (even of
the same model) may not be restored using this
camcorder.
SD cards supported for saving
configuration data
SDHC memory cards
*
(Speed Class: 4 to 10, non-
UHS, Capacity: 2 to 32 GB)
SD memory cards
*
(Capacity: up to 2 GB)
* Referred to as “SD cards” in this manual.
SD cards must be formatted the first time they are
used in the camcorder.
SD cards for use in the camcorder should be
formatted using the format function of the
camcorder. If a message appears when the SD
card is inserted into the camcorder, format the SD
card.
1
Select Operation >Format Media >SD
Card (Utility) in the setup menu.
A confirmation screen prompting whether to
format the card appears.
2
Turn the MENU knob to select
[Execute], then press the knob.
Formatting begins.
During formatting, a message and progress
state (%) is displayed and the ACCESS
indicator is lit orange.
When formatting ends, a completion
message appears. Press the MENU knob to
dismiss the message.
Note
Formatting an SD card erases all data on the card. The
card cannot be restored.
Handling SD Cards for
Saving Configuration
Data
Formatting (Initializing) SD Cards
