Sony PXW-X500, Manual

Page: 21 / 211

21
c
PC connector
Used to put this camcorder into USB connection
mode and use it as an external storage device for
a computer. When a computer without
ExpressCard slot is connected to this connector,
every memory card inserted in the camcorder is
recognized as a drive on the computer.
d
External device connector
Reserved for use in a future upgrade.
e
USB wireless LAN module connector
Connect to the IFU-WLM3 USB Wireless LAN
Module (supplied), optional CBK-WA02
Wireless LAN Adaptor, optional modem, or
optional CBK-NA1 Network Adaptor (option) to
enable communications with wireless LAN
devices and networks.
For details, see “Connecting Devices using Wireless
LAN” (page 89).
f
SxS memory card slots
These two slots (A and B) can receive SxS
memory cards or other recording media
(see
page 66) .
g
ACCESS indicator
Indicates the state of slots A and B (see page 66) .
You can check whether the indicators are lit even
when the slot cover is closed.
h
EJECT (SxS memory card) button
To remove the recording media from the slot,
press the EJECT button to release the lock, then
press the button once more. This makes the media
come out of the slot partially
(see page 66) .
i
Slot cover
Slide to the left and right to open and close.
j
PROXY SD card slot
Insert an SD card for recording proxy data.
k
ACCESS indicator
Lights up orange when the SD card is being
accessed.
l
SLOT SELECT (SxS memory card
select) button
When SxS memory cards are loaded in both card
slots A and B, press this button to select the card
you want to use
(see page 67) .
m
HDMI connector
Connect an HDMI device, such as a monitor or
recording unit, to output HD or SD HDMI video
and audio signals.
n
GENLOCK IN (genlock signal input)
connector (BNC type)
This connector inputs a reference signal when the
camcorder is to be genlocked or when timecode is
to be synchronized with external equipment. The
supported reference signals vary depending on
the current system frequency as shown in the
following table.
o
TC IN (timecode input) connector
(BNC type)
To apply an external lock to the timecode of the
camcorder, input the reference timecode.
For details, see “Setting the Timecode” (page 59).
p
VIDEO OUT connector (BNC type)
Outputs video signals for monitoring.
q
TC OUT (timecode output) connector
(BNC type)
To lock the timecode of an external VTR to the
timecode of this camcorder, connect this
connector to the external VTR’s timecode input
connector.
System frequency Supported reference signals
59.94i 1080/59.94i, 480/59.94i
59.94P 1080/59.94i, 480/59.94i
50i 1080/50i, 576/50i
50P 1080/50i, 576/50i
29.97P 1080/59.94i, 480/59.94i
25P 1080/50i, 576/50i
23.98P 1080/23.98PsF