Sony PXW-X320 Operating Instructions Manual Download Page 97

Page: 97 / 223

Note

The following functions are disabled at the freeze mix
times.
• Menu operations
• During Focus Mag display

• Marker display
• Zebra display
• Peaking display
• Skin detail display

To cancel the freeze mix display

Do one of the following.
• Press an assignable switch again to which the

Freeze Mix function has been assigned.
The freeze mix display is canceled and the
display returns to the normal camera picture.

• Start recording

(see page 87)

Normal recording starts.

Planning metadata is information about shooting
and recording plans, recorded in an XML file.

Example of a planning metadata file

You can shoot using clip names and shot mark
names defined in advance in a planning metadata
file.
The camcorder can display clip names and shot
mark names defined in the following languages.
• English
• Chinese
• German
• French

• Italian
• Spanish
• Dutch

• Portuguese
• Swedish
• Norwegian
• Danish
• Finnish

1) Some characters may be displayed in a similar font.

Note

If you define clip name and shot mark names in
languages other than the above, they may not be
displayed on the viewfinder screen.

To record planning metadata together with
recording clips, you need to load a planning

Planning Metadata
Operations

Loading a Planning Metadata File
into Camcorder’s Internal Memory

Summary of Contents for PXW-X320
































































































































































































































Search results

Summary of Contents for PXW-X320

Reviews:

Sony PXW-X320, Operating Instructions Manual, Page: 97 / 223

Search results

Summary of Contents for PXW-X320

Reviews: