173
5
To execute the save, select “Execute,”
and then press the MENU knob.
To cancel the save, select “Cancel,” and
then press the MENU knob.
If you selected Scene Store SxS in step
2
, the
ACCESS lamp lights when you execute the
save (in blue on the right-side panel and in
orange in the card slot section).
When the data has been saved to the SxS
memory card, a completion message appears
and the ACCESS lamp goes out.
If saving to internal memory or a USB flash
drive, the ACCESS lamp does not light up.
Insert an SxS memory card into a memory card
slot, then proceed as follows.
For details about menu operations, see “Basic Setup
Menu Operations” (page 115).
1
Select “FILE” > “Scene” in the setup
menu.
2
Select “Scene Recall SxS” > “Execute.”
When loading from internal memory, select
“Scene Recall Mem” > “Execute.” When
loading from a USB flash drive (UDF,
exFAT modes), select “Scene Recall USB” >
“Execute.”
3
Press the MENU knob.
A list box of scene files appears. File
numbers where “No File” is displayed are
empty file numbers.
File numbers with a file name or a date and
time are the number of files that already
contain data.
4
Select the desired file number, and then
press the MENU knob.
A confirmation message appears.
5
To execute the load, select “Execute,”
and then press the MENU knob.
To cancel the load, select “Cancel,” and
then press the MENU knob.
If you selected “Scene Recall SxS” in step
2
,
the ACCESS lamp lights when you execute
the load (in blue on the right-side panel and
in orange in the card slot section).
When the data has been loaded from the SxS
memory card, a completion message appears
and the ACCESS lamp goes out.
If saving to internal memory or a USB flash
drive, the ACCESS lamp does not light up.
Loading Scene Files
Summary of Contents for PXW-X320
Page 223: ......
