Sony PXW-X320 Operating Instructions Manual Download

Page: 121 / 223

121

Settings in bold are the factory default values.

OPERATION Menu

OPERATION

Item

Sub-item

Setting

Description

Format

Specifies the camcorder’s
operating mode and
recording format.

File System

UDF/

exFAT

/FAT

Switches between UDF, exFAT, and
FAT as the recording mode (execute
using Execute).

HD/SD

/SD

Switches between HD or SD as the
operating mode (execute using
Execute).

HD System Line

1080

/720

When the operating mode is HD, sets
the number of system lines to 1080 or
720 (execute using Execute).

System
Frequency

The available settings
vary depending on the
settings of “HD/SD,”
“HD System Line,”
and “Country.”

Selects the system frequency (execute
using Execute).

59.94i

/29.97P/

23.98P

When “HD/SD” is set to “HD,” “HD
System Line” is set to “1080,” and
“Country” is set to other than “PAL
Area.”

59.94P

/29.97P/

23.98P

When “HD/SD” is set to “HD,” “HD
System Line” is set to “720,” and
“Country” is set to other than “PAL
Area.”

59.94i

/29.97P

When “HD/SD” is set to “SD” and
“Country” is set to other than “PAL
Area.”

50i

/25P

• When “HD/SD” is set to “HD,” “HD

System Line” is set to “1080,” and
“Country” is set to “PAL Area.”

• When “HD/SD” is set to “SD” and

“Country” is set to “PAL Area.”

50P

/25P

When “HD/SD” is set to “HD,” “HD
System Line” is set to “720,” and
“Country” is set to “PAL Area.”

Rec Format

The available settings
vary depending on the
settings in File
System, HD/SD, HD
System Line, and
System Frequency.

Selects the recording format (execute
using Execute).

XAVC-I/

XAVC-L50

XAVC-L35/
XAVC-L25/
HD422 50/
HD420 HQ1920/
HD420 HQ1440

When the File System setting is
[exFAT], the HD/SD setting is [HD],
the HD System Line setting is [1080],
and the System Frequency setting is
[59.94i] or [50i].

Summary of Contents for PXW-X320
































































































































































































































Search results

Summary of Contents for PXW-X320

Reviews:

Related manuals for PXW-X320

Brands by name

Popular brands

Sony PXW-X320, Operating Instructions Manual

Search results

Summary of Contents for PXW-X320

Reviews:

Related manuals for PXW-X320

Brands by name

Popular brands