Sony PXW-X200, Operating Instructions Manual

Page: 116 / 180

Men
u
Conf
ig
ur
at
ion an
d
De
ta
iled Se
tt
ing
s
Setup Menu List 116
Regenerate
Key
Execute / Cancel Regenerates the key (password).
Note
When “Network Mode” is set to “Station/Modem/Wired
LAN,” this cannot be set.
Channel Auto / CH1 to CH13 Sets the channel for wireless LAN.
Note
When “Network Mode” is set to “Modem/Wired LAN,” this
cannot be set.
IP Address
Displays the IP address of the camcorder.
Wired LAN Set
Setting wired LAN
connection
Set when
“Network Mode”
is set to “Wired
LAN.”
DHCP
On / Off
Set DHCP settings.
When set to “On,” an IP address is automatically assigned to
the camcorder.
When you manually input an IP address into the camcorder,
set to “Off.”
IP Address
(DHCP/On: Automatic
acquisition
DHCP/Off: 192.168.2.50 )
Enter the IP address of the camcorder.
When “DHCP” is set to “Off,” this is available.
Subnet Mask
(DHCP/On: Automatic
acquisition
DHCP/Off: 255.255.255.0 )
Enter the subnet mask of the camcorder.
When “DHCP” is set to “Off,” this is available.
Gateway
(DHCP/On: Automatic
acquisition
DHCP/Off: 0.0.0.0 )
Enter the gateway for the access point.
When “DHCP” is set to “Off,” this is available.
DNS Auto
On
/ Off
Set DNS automatic acquisition settings.
When set to “On,” the DNS server address is automatically
acquired.
1st DNS Server
(DHCP/On: Automatic
acquisition
DHCP/Off: 0.0.0.0 )
Enter the primary DNS server for the router.
When “DNS Auto” is set to “Off,” this is available.
2nd DNS Server
(DHCP/On:
Automatic
acquisition
DHCP/Off:
0.0.0.0
)
Enter the secondary DNS server for the router.
When “DNS Auto” is set to “Off,” this is available.
Set
Execute/Cancel
Activates the setting for the Wired LAN connection (select
Execute).
User Name
(
admin
) Sets a desired user name in 1 to 31 alphanumeric characters.
Note
When “Network Mode” is set to “Modem,” this cannot be set.
Password ( pxw-x200 ) Sets a password in 0 to 31 alphanumeric characters.
Notes
• Each password character is displayed as “ * .”
• When “Network Mode” is set to “Modem,” this cannot be
set.
NETWORK
SET
Menu items Subitems and setting values Contents