Sony PXW-X160, Manual

Page: 21 / 100

7
GB
GB
The following describes added/changed functions only.
The following items have been added to the network status screen.
Network status screen
Displays the settings or status of the network.
* Status of the network client mode is displayed as follows.
On-screen Indication
Status screen
Wired LAN Remote Displays whether the remote operation is enabled or disabled for a connection via
LAN cable.
CCM Name Name of CCM which the camcorder is connected to during the network client
mode.
NW Client Mode Status* Status of the network client mode.
Number of Distribution The number of destinations for current streaming.
Indication Status Description
Off Not connected to CCM. Network client mode is off.
Connected Connected to CCM. The camcorder is connected to CCM while the network client
mode is on, and the camcorder control from CCM is enabled.
Connecting Connecting to (disconnecting
from) CCM. The camcorder is connecting to (disconnecting from) CCM.
Wait until the connection (or disconnection) completes.
If “Connecting” remains on the LCD screen, the CCM
address you input may be incorrect. Check whether the
address setting is correct.
Awaiting Awaiting CCM connection. The network setting is disabled, though the network client
mode is on. To connect to CCM, enable the network setting.
Address Error CCM address error. Host name and IP address of CCM for the camcorder
connected may be incorrect. Check whether the setting is
correct.
Auth. Failed CCM user name/password error. User name or password to connect to CCM may be incorrect.
Check whether the setting is correct.
No Inet Access Internet connection error. The camcorder cannot connect to the network. Check the
network connection or network settings.
Cert. not Valid CCM certificate error. The certificate for CCM is invalid. The date may be set to an
invalid value. Check the date setting.