Sony PXW-FS7M2 Operating Instructions Manual Download

Page: 66 / 103

000

5. Menu Display and Settings: Setup Menu List

Recording >SDI/HDMI Rec Control

Sets SDI/HDMI recording control settings.

Item

Sub-item setting

Description

Setting

On /

Off

Turns recording start/stop control for an
external connected device, using SDI/HDMI
signals, on/off.
When different buttons are assigned using
Rec Button Set, the recording control signal
follows the recording state of slot A.

[Tip]

When set to On, this starts/stops recording on an
external connected device, even if no XQD card is
currently inserted.

Thumbnail Menu

Thumbnail
Item

Sub-item setting

Description

Display Clip
Properties

Displays the clip properties screen.

Set Index
Picture

Sets the index picture of a clip.

Thumbnail >Thumbnail View

Sets thumbnail screen display format settings.

Item

Sub-item setting

Description

Essence Mark
Thumbnail

All

/ Rec Start / Shot Mark1 / Shot Mark2 / Shot

Mark3 / Shot Mark4 / Shot Mark5 / Shot Mark6
/ Shot Mark7 / Shot Mark8 / Shot Mark9 / Shot
Mark0

Displays thumbnails of frames with essence
marks.

Clip
Thumbnail

Displays thumbnails of recorded clips.

Thumbnail >Set Shot Mark

Sets shot mark settings.

Item

Sub-item setting

Description

Add Shot
Mark1

Adds Shot Mark1.

Thumbnail >Set Shot Mark

Sets shot mark settings.

Item

Sub-item setting

Description

Delete Shot
Mark1

Deletes Shot Mark1.

Add Shot
Mark2

Adds Shot Mark2.

Delete Shot
Mark2

Deletes Shot Mark2.

Thumbnail >Set Clip Flag

Sets clip flag settings.

Item

Sub-item setting

Description

Add OK

Adds an OK flag.

Add NG

Adds an NG flag.

Add KEEP

Adds a Keep flag.

Delete Clip
Flag

Deletes all flags.

Thumbnail >Lock/Unlock Clip

Sets clip protection settings.

Item

Sub-item setting

Description

Select Clip

Selects and locks/unlocks a clip.

Lock All Clips

Locks all clips.

Unlock All
Clips

Unlocks all clips.

Thumbnail >Delete Clip

Deletes clips.

Item

Sub-item setting

Description

Select Clip

Deletes the selected clip.

All Clips

Deletes all of the displayed clips.

Thumbnail >Filter Clips

Sets settings of clips to display.

Item

Sub-item setting

Description

Display only clips that have an OK flag.

Display only clips that have an NG flag.

KEEP

Display only clips that have a Keep flag.

None

Display only clips that have no flag.

Summary of Contents for PXW-FS7M2








































































































Search results

Summary of Contents for PXW-FS7M2

Reviews:

Related manuals for PXW-FS7M2

Brands by name

Popular brands

Sony PXW-FS7M2, Operating Instructions Manual

Search results

Summary of Contents for PXW-FS7M2

Reviews:

Related manuals for PXW-FS7M2

Brands by name

Popular brands