000
4. Thumbnail Screen
45
Playing Clips
Playing Recorded Clips
You can play recorded clips when the camcorder
is in recording standby (Stby) mode.
1
Insert an XQD memory card for playback.
2
Press the THUMBNAIL button.
3
Turn the SEL/SET dial (page 6) to move the
cursor to the thumbnail for the clip you want
to play.
4
Press the SEL/SET dial.
Playback begins from the start of the selected
clip.
You can control playback by pressing the
following buttons.
SEL/SET dial:
Pauses playback.
Press again to return to normal playback.
Press left/right buttons:
Jumps to start of clip/start of next clip.
Press and hold left/right buttons:
Fast reverse/forward.
Returns to normal playback when you release
the button.
CANCEL/BACK button:
Stops playback, and returns to recording
standby mode.
[Notes]
ˎ
ˎ
There may be momentary picture breakup or still image
display at the boundary between clips. You cannot
operate the camcorder during this period.
ˎ
ˎ
When you select a clip in the thumbnail screen and begin
playback, there may be momentary picture breakup at
the start of the clip. To view the start of the clip without
breakup, put the camcorder into playback mode, pause,
then use the left button of the SEL/SET dial to return to
the start of the clip, and start playback again.
ˎ
ˎ
You can also control playback using the supplied remote
control.
