Sony PXW-FS7, Operating Instructions Manual

Page: 51 / 128

51
You can connect up to four channels of XLR
audio devices to the camcorder at the same time
by using an XLR-K2M XLR adaptor (not
supplied).
Attach the XLR adaptor to the MI shoe, and set
Audio Input >CH3 Input Select to “Shoe 1” and
CH4 Input Select to “Shoe 2” in the Audio menu.
Camcorder functions that overlap will be disabled
for channels on which the XLR adaptor is
selected as the input. Use the switches and dials
on the XLR adaptor to perform adjustments.
Notes
• If Audio Input >CH3 Level and CH4 Level in the
Audio menu are set to “Audio Input Level,” Audio
Input Level of the camcorder will be set to match the
level adjusted on the XLR adaptor. Audio Input Level
is also enabled when the XLR adaptor switch is set to
AUTO. When “Through” is specified, audio will be
recorded at the level adjusted with the XLR adaptor.
• You can also assign to CH1 and CH2 by attaching an
XLR adaptor and setting Audio Input >CH1 Input
Select and CH2 Input Select in the Audio menu to
“Shoe 1” and “Shoe 2,” respectively. However, if input
from an XLR adaptor is assigned to both CH1 and
CH2, input from the INPUT1/INPUT2 connectors on
the camcorder can no longer be assigned to the
channels.
The camcorder can connect to smartphones,
tablets, and other devices using wireless LAN
connection by attaching the IFU-WLM3 USB
Wireless LAN Module (supplied) or a
CBK-WA100 Wireless Adaptor (option).
Note
USB wireless modules other than the IFU-WLM3 are not
supported.
The following are supported from devices
connected by wireless LAN.
• Remote control
Enables remote control of the camcorder.
• Video monitoring (CBK-WA100 only)
Enables monitoring of the video from the
camcorder.
CBK-WA100 (option) and the Content
Browser Mobile application are required.
For details about the Content Browser Mobile
application, contact your Sony sales or service
representative.
Compatible devices
You can use a smartphone, tablet, or computer to
configure and operate the camcorder. The
supported devices, OS, and browsers are shown
in the following table.
Adding Audio Input Connectors
Connecting Devices
using Wireless LAN
Device OS Browser
Smartphone Android 4.3 Chrome
iOS7 Safari
Tablet Android 4.3 Chrome
iOS7 Safari
Computer Microsoft Windows 7/
Microsoft Windows 8.1 Chrome
Mac OS 10.8/10.9 Safari