Sony PXW-FS7, Operating Instructions Manual

Page: 38 / 128

38
Recording to memory cards A and B
simultaneously (Simul Rec)
You can simultaneously record using both
memory cards A and B.
Set Simul Rec >Setting in the Recording
menu to “On.”
Note
Simultaneous recording is not supported in Slow &
Quick Motion mode
(page 83) or Picture Cache
recording mode (page 83) .
Also, simultaneous recording is not supported for the
following recording formats
(page 89) .
NTSC Area
XAVC-I
4096×2160 59.94P, 4096×2160 29.97P,
4096×2160 23.98P, 3840×2160 59.94P,
3840×2160 29.97P, 3840×2160 23.98P,
1920×1080 59.94P
XAVC-L
3840×2160 59.94P, 3840×2160 29.97P,
3840×2160 23.98P
RAW (with XDCA-FS7, HXR-IFR5, and
AXS-R5 connected)
4096×2160 59.94P, 4096×2160 29.97P,
4096×2160 23.98P, 2048×1080 59.94P,
2048×1080 29.97P, 2048×1080 23.98P
RAW & XAVC-I (with XDCA-FS7, HXR-IFR5,
and AXS-R5 connected)
4096×2160 59.94P, 2048×1080 59.94P
ProRes 422 HQ, ProRes 422
(with XDCA-FS7 connected)
1920×1080 59.94i, 1920×1080 29.97P,
1920×1080 23.98P
PAL Area
XAVC-I
4096×2160 50P, 4096×2160 25P, 3840×2160 50P,
3840×2160 25P, 1920×1080 50P
XAVC-L
3840×2160 50P, 3840×2160 25P
RAW (with XDCA-FS7, HXR-IFR5, and
AXS-R5 connected)
4096×2160 50P, 4096×2160 25P,
2048×1080 50P, 2048×1080 25P
RAW & XAVC-I (with XDCA-FS7, HXR-IFR5,
and AXS-R5 connected)
4096×2160 50P, 2048×1080 50P
ProRes 422 HQ, ProRes 422
(with XDCA-FS7 connected)
1920×1080 50i, 1920×1080 25P
Changing the settings of the record
START/STOP buttons on the camcorder
and handle
When the simultaneous recording (Simul Rec) is
enabled, you can start/stop recording to each
memory card independently using the record
START/STOP buttons on the camcorder and the
handle.
By factory default, both buttons are set to start/
stop simultaneous recording to both memory
cards A and B.
• “Rec Button [SlotA SlotB] Handle Rec Button
[SlotA SlotB]”
When the buttons are set to control recording for
different memory cards, SDI/HDMI Rec Control
and RAW Rec Control follow the recording state
of slot A.
To change the setting
Select Simul Rec >Rec Button Set in the
Recording menu.
Rec Button Set Buttons and memory
cards
“Rec Button [SlotA
SlotB] Handle Rec
Button [SlotA SlotB]” Starts/stops simultaneously
recording to memory cards A
and B using either button.
“Rec Button [SlotA]
Handle Rec Button
[SlotB]” The record START/STOP
button starts/stops recording to
memory card A, and the record
START/STOP button on the
handle starts/stops recording to
memory card B.
“Rec Button [SlotB]
Handle Rec Button
[SlotA]” The record START/STOP
button starts/stops recording to
memory card B, and the record
START/STOP button on the
handle starts/stops recording to
memory card A.