Sony PXW-FS7 Page 21 Operating Instructions Manual Download

Page: 21 / 128

Removing the microphone holder

Remove the stopper, and use the reverse
procedure of attaching the microphone holder.

Note

Attach/remove the viewfinder while the camcorder is
turned off.

Loosen the viewfinder clamp and insert
the viewfinder onto the protrusion on
the front of the handle.

Adjust the left/right positioning of the
viewfinder, tighten the clamp, and then
connect the viewfinder cable to the
viewfinder connector of the camcorder.

Note

Check that the viewfinder is securely attached. The
viewfinder may fall off during shooting if the clamp is
loose.

Adjusting the angle of the viewfinder

Tilt the viewfinder up/down to adjust the angle of
the viewfinder.

You can adjust the angle so that the viewfinder is
facing the subject. Setting the MIRROR switch

(page 48)

to the B/T flips the left and right sides

of the image on the LCD screen, but the image is
recorded in the correct orientation.

Adjusting the viewfinder contrast

Turn the CONTRAST knob to adjust the contrast.

You can adjust the brightness in the viewfinder
using VF Setting >Brightness

(page 78)

in the VF

menu.

Removing the viewfinder

Loosen the viewfinder clamp, and use the reverse
procedure of attaching the viewfinder.

Attaching the Viewfinder

Clamp

Summary of Contents for PXW-FS7

































































































































Search results

Summary of Contents for PXW-FS7

Reviews:

Related manuals for PXW-FS7

Brands by name

Popular brands

Sony PXW-FS7, Operating Instructions Manual

Search results

Summary of Contents for PXW-FS7

Reviews:

Related manuals for PXW-FS7

Brands by name

Popular brands