Sony PXW-FS5, Operating Manual

Page: 98 / 200

98
3
Select (NETWORK SET) t
[STREAMING] t [EXECUTE] t
network connection method.
• The network connection starts.
• To cancel streaming, press the MENU
button or press the ASSIGN button
assigned with the [STREAMING]
function or select
.
• When connection is successful,
appears on the screen and the
camcorder is ready to start streaming.
4
Press the THUMBNAIL button to
start streaming distribution.
• The screen icon changes to .
z Tips
• You can assign [STREAMING] to an ASSIGN
button (p. 85). Pressing the ASSIGN button
with the assigned function displays the network
connection setup screen.
• You can assign [STREAM OPERATION] to an
ASSIGN button. Pressing the ASSIGN button
with the assigned function starts streaming
distribution (p. 85).
• To simultaneously record XAVC or AVCHD
movies to memory card and distribute a stream,
start recording after the camcorder is in
streaming standby state.
• If an error occurs during streaming distribution
standby or during streaming distribution, a
message appears. If [RECONNECT] appears,
selecting it will attempt to reconnect the
camcorder. Selecting [END] will disconnect the
camcorder. Repeat the procedure from step
1 to
reconnect.
b
Notes
• The streaming function is not available when
using the following functions.
– During playback
– During thumbnail display
– In the following formats when the file format
is AVCHD:
1080/60p, 1080/50p, 720/60p, 720/50p
– In the following formats when the file format
is XAVC QFHD:
2160/30p 100Mbps, 2160/24p 100Mbps,
2160/25p 100Mbps
• The following functions are not available when
the streaming function is on.
– Slow & Quick Motion
– PROXY REC MODE
– Super Slow Motion
– FACE DETECTION
– COLOR BAR
– CENTER SCAN
– DATE REC
– SIMULTANEOUS REC/RELAY REC
• Only wired LAN connection is supported when
[AIRPLANE MODE] is set to [ON].
• Streaming distribution transmits the raw video
and audio data via the Internet.
Accordingly, the data may be disclosed to other
parties.
• Check that the streaming data is being received
by the receiving device.
• Data may be transmitted to a third party if the
address or other settings are configured
incorrectly.
• Some frames may not be played, depending on
the network status.
• The image quality of fast-changing scenes may
be adversely affected.
Camcorder operation during
streaming
The following functions are enabled during
streaming. Use the hardware switches and
buttons to control the camcorder. Operation
from the menu is not supported.
• Zooming
• Focusing
• To adjust the output audio level, adjust the
input level using the AUDIO LEVEL dial.
Using network functions (continued)