Sony PXW-FS5, Operating Manual

Page: 46 / 200

46
release the button, the setting returns to
manual focusing.
To use focus hold
Set the FOCUS (AUTO/MAN) switch A
to “AUTO,” then press and hold the PUSH
AUTO button
B .
The image is shot with the focus fixed at the
point you start to press the button. Keep the
button pressed to shoot. If you release the
button, the setting returns to auto focusing.
b Note
• If the lens has the same function button as your
camcorder, the function on the lens works the
same as your camcorder. For example, when
focus hold is active on your camcorder, the
button on the lens functions as focus hold.
The selected area on the LCD screen is
magnified and displayed. This is useful
when adjusting the focus.
Press the FOCUS MAG button A on
the grip.
The setting changes with each press of the
button.
You can change the position of the enlarged
display using the multi-selector
B
on the
grip or the SEL/SET dial on the camcorder.
Press the multi-selector
B
or SEL/SET
dial to set the enlarged display position
back to the center.
b
Note
• Even though the image appears enlarged on the
LCD screen, the recorded image is not enlarged.
z
Tips
• You can assign this function to an ASSIGN
button (p. 85).
• You can change the magnification ratio with
[FOCUS MAG RATIO] (p. 159).
Using the focus magnifier
Enlarged display position
Adjusting the focus (continued)