Sony PXW-FS5 Page 28 Operating Manual Download

Page: 28 / 200

Insert the accessory shoe plate in
the direction of the arrow on the
plate surface until the end of the
plate engages the end of the
shoe.

To remove the accessory shoe

Remove the shoe plate in the same way as
described in step

of “Attaching the

accessory shoe”.

Attach the microphone holder to the handle.

Place the microphone

into the

microphone holder

Connect the plug of the
microphone to the INPUT 1 or
INPUT 2 jack

Place the microphone cable into
the cable holder

Tips

• If the microphone cannot be attached securely,

use the spacer supplied with the microphone.

• The tip of the microphone may appear in the

picture, depending on the type of lens that is
attached. Adjust the position of the microphone.

Accessory shoe

Shoe plate

Attaching the microphone (sold
separately)

Step 4: Attaching the handle, accessory shoe, microphone, LCD screen,
and grip (continued)

Summary of Contents for PXW-FS5









































































































































































































Search results

Summary of Contents for PXW-FS5

Reviews:

Related manuals for PXW-FS5

Brands by name

Popular brands

Sony PXW-FS5, Operating Manual

Search results

Summary of Contents for PXW-FS5

Reviews:

Related manuals for PXW-FS5

Brands by name

Popular brands