Sony PXW-FS5, Operating Manual

Page: 113 / 200

113
Re
cor
d
in
g
This locks the buttons and switches to
prevent recording errors by accidental
operation.
Slide the HOLD switch A in the
direction of the arrow.
To cancel the setting
Slide the HOLD switch
A
in the opposite
direction of the arrow so that the yellow
part is not visible.
b Note
• You cannot lock the following buttons and
switches.
– ON/STANDBY switch (camcorder)
– AUDIO LEVEL (CH-1/CH-2) dials
(camcorder)
– ND FILTER dial (camcorder)
– FOCUS (AUTO/MAN) switch (camcorder)
– ISO/GAIN — L/M/H switch (camcorder)
– WHT BAL — B/A/PRESET switch
(camcorder)
– PRESET/VARIABLE switch (camcorder)
– INPUT 1 switch (camcorder)
– INPUT 2 switch (handle)
– Grip rotate lever (grip)
– LCD ON/OFF switch (LCD screen)
– MIRROR switch (LCD screen)
– Lens switches (lens)
z Tip
• You can change the functions to be locked with
[HOLD SW SET] (p. 166).
You can review the most recently recorded
scene on the LCD screen. This function is
available when the function is assigned to
an ASSIGN button.
1
Assign [LAST SCENE REVIEW] to
an ASSIGN button beforehand
(p. 85).
2
After you stop recording, press
the assigned ASSIGN button.
The camcorder plays from the start to
the end of the most recently recorded
scene, then returns to standby mode.
To stop reviewing the last scene
Press the ASSIGN button during playback.
Review stops, and the camcorder returns to
standby mode.
b
Notes
• If you edit the movie or remove the media after
you stop recording, the Last Scene Review
function may not work correctly.
• Last Scene Review is not available in Super
Slow Motion mode.
z
Tip
• You can assign this function to an ASSIGN
button (p. 85).
Preventing accidental operation
(HOLD switch)
Reviewing the most recently
recorded scene (Last Scene
Review)
Continued ,