Sony PXW-FS5, Operating Manual

Page: 108 / 200

108
COLOR DEPTH
To set the color depth for each color phase.
This function is more effective for chromatic colors and less effective for achromatic colors.
The color looks deeper as you increase the setting value to more positive side, and lighter as
you decrease the value to more negative side.
COLOR CORRECTION
To set the color correction.
Item Description and settings
[R] –7 (light red) to +7 (deep red)
[G] –7 (light green) to +7 (deep green)
[B] –7 (light blue) to +7 (deep blue)
[C] –7 (light cyan) to +7 (deep cyan)
[M] –7 (light magenta) to +7 (deep magenta)
[Y] –7 (light yellow) to +7 (deep yellow)
Item Description and settings
TYPE Selects color correction type.
[OFF]: Not correct colors.
[COLOR REVISION]: Corrects colors stored in memory.
Colors not stored in memory (displayed in black and white when
[COLOR EXTRACT] is set) will not be corrected.
[COLOR EXTRACT]: Displays areas in colors that are stored in the
memory.
The other areas are displayed in black and white. You can use this
function to add effects to your movies or to confirm the colors to be
stored in the memory.
MEMORY
SELECTION Selects a memory to make active.
[1]: Sets Memory 1 to be active.
[2]: Sets Memory 2 to be active.
[1&2]: Sets both Memory 1 and 2 to be active.
MEMORY1 COLOR Sets colors stored in Memory 1.
[PHASE]: Sets color phase.
0 (purple) to 8 (red) to 16 (yellow) to 24 (green) to 31 (blue)
[PHASE RANGE]: Sets color phase range.
0 (no color selection), 1 (narrow: to select only a single color) to 31
(wide: to select multiple colors in similar color phase)
[SATURATION]: Sets saturation.
0 (to select from light colors to dark colors) to 31 (to select dark color)
[ONE PUSH SET]: Automatically sets [PHASE] for a subject at the
center of the marker. [SATURATION] is set to 0.
Useful functions (continued)