Sony PVM-741, Operating Instructions Manual

Page: 23 / 36

Adjustment Using the Menus
23
USER CONFIG menu
The USER CONFIG menu is used for setting the
system, marker, T/C display, WFM/ALM/VECTOR,
focus, function button, closed caption, and audio.
SYSTEM SETTING
Submenu Setting
NTSC SETUP Selects the NTSC setup level from
two modes.
The 7.5 setup level is used mainly
in North America. The 0 setup level
is used mainly in Japan.
FORMAT DISPLAY Selects the display mode of the
signal format and scan mode.
•
OFF : The display is hidden.
• AUTO : The format and scan
mode are displayed for
about five seconds when the
input of the signal starts.
LANGUAGE Selects the menu or message
language from among seven
languages.
•
ENGLISH : English
• FRANÇAIS : French
• DEUTSCH : German
• ESPAÑOL : Spanish
• ITALIANO : Italian
• : Japanese
• : Chinese
POWER SAVING Sets the power saving mode on or
off. When you set to ON, the
monitor goes into power saving
mode if no signal is input for about
one minute.
S Y S T E M S E T T I N G :
M A R K E R S E T T I N G :
T / C D I S P L AY S E T T I N G :
W F M / A L M / V E C T O R S E T T I N G :
F O C U S S E T T I N G :
F U N C T I O N B U T T O N S E T T I N G :
C L O S E D C A P T I O N S E T T I N G :
A U D I O S E T T I N G :
USER CONFIG
N T S C S E T U P : xxxxx x
F O R M AT D I S P L AY: xx xxxx
L A N G U A G E : E N G L I S H
P O W E R S AV I N G : xxx xxx
I / P M O D E : xxxxxxx
L E D B R I G H T N E S S : xxxxx x
R G B R A N G E : xxxxxx
S C R E E N S AV E R : xxxx xx
S D P I X E L M A P P I N G : xxxxxxx
USER CONFIG – SYSTEM SETTING
I/P MODE (picture delay
minimum) Selects to set the delay by the
picture processing to the minimum
level when the interlace signal is
input.
•
INTER-FIELD *: Mode for
giving precedence to the
picture quality. Performs
interpolation depending on
the movement of the images
between the fields. It takes
longer than the other setting
modes to process the
picture.
• FIELD MERGE : The
processing time is shorter.
Combines the lines in the
odd fields and even fields
alternately regardless of the
movement of images.
Suitable for viewing still
images.
• LINE DOUBLER : The
processing time is shorter.
Performs interpolation by
repeating each line in the
data receiving sequence
regardless of the field. As
the line flicker is displayed
in this mode, it is available
for checking the line flicker
of the telop work and so on.
• INTRA-FIELD : INTRA-FIELD
is only available for 1920 ×
1080 SDI signal input.
Mode to provide naturally
reproduced image and quick
picture processing. Performs
interpolation within the
fields. Suitable for 1920 ×
1080 SDI signal input.
*
When DISPLAY in WFM/ALM/
VECTOR SETTING is activated,
INTER-FIELD cannot be
selected.
LED BRIGHTNESS Sets the brightness of the LED of
the buttons.
•
HIGH : The LED becomes
brighter.
• LOW : The LED becomes darker.
RGB RANGE Sets the black level and white level
for the RGB format of HDMI
signals.
•
FULL : 0 (black level) to 255
(white level)
• LIMITED : 16 (black level) to
235 (white level)
Submenu Setting