manualshive.com logo in svg

Sony Pro 10, User Manual

Get the most out of your Sony Pro 10 with our comprehensive and easy-to-follow User Manual. Discover all the features and functions of this powerful device with the help of our free manual. Simply download it from manualshive.com and unleash the full potential of your Sony Pro 10.

Share
Download
background image

Appendix D 

Using CSOUND, MTU, IRCAM, BICSF, and EBICSF Files 

Although Sound Forge® Pro software supports a large number of sound file formats directly, it does not support the CSOUND, MTU, 
IRCAM, BICSF or EBICSF file types. However, you can use the Sound Forge Raw File Type capabilities to extract sound data from these file 
types. 

About IRCAM files 

The IRCAM or IRCAM-Gross format consists of a 1024-byte header prior to the audio data. This header contains standard information like 
the number of channels, sampling rate, and data format, but can also contain the name of the sample and comments. This format is 
used by the MTU system and these files are frequently referred to as MTU files. IRCAM files support two types of data formats: 16-bit 
linear PCM and floating point data. 

About BICSF and EBICSF files 

BICSF and EBICSF files (Berkeley/IRCAM/CARL Sound File or Extended BICSF) are extensions of the IRCAM format. Instead of using the 
standard IRCAM header, these files replace the first 28 bytes of the header with a standard NeXT/Sun header. This allows the IRCAM 
format to store additional information in its 1024-byte header, while also allowing the files to be read by software that supports the 
NeXT/Sun file format, such as Sound Forge software. 

Opening files 

BICSF and EBICSF files 

When reading BICSF and EBICSF files, the software identifies them as NeXT/Sun files. This is because the header of the BICSF file has 
been modified to allow it to be read as a NeXT/Sun file. These files are read as long as they are in one of the supported NeXT/Sun data 
formats. 

IRCAM, CSOUND and MTU files 

To read these formats, users must import them as Raw data files. This is best accomplished by configuring the parameters in the Raw File 
Type dialog and saving them as presets. The Raw File import function allows these files to be opened providing they are stored in 16-bit 
linear format. Sound Forge software does not open floating point format IRCAM files. 

APPENDIX D 

| 

341 

Summary of Contents for Pro 10































































































































































































































































































































































































Reviews:

No comments

Related manuals for Pro 10

DAVIS WeatherLink Addendum preview
WeatherLink
Brand: DAVIS Pages: 20
Sanford Dymo Label v.8 User Manual preview
Dymo Label v.8
Brand: Sanford Pages: 122
FARONICS DEEP FREEZER PROFESSIONAL Manual preview
DEEP FREEZER PROFESSIONAL
Brand: FARONICS Pages: 31
Extreme Networks EPICenter 4.1 Software Installation Manual preview
EPICenter 4.1
Brand: Extreme Networks Pages: 546
Extreme Networks ExtremeWare 7.5 Command Reference Manual preview
ExtremeWare 7.5
Brand: Extreme Networks Pages: 2546
ScanSoft OMNIPAGE 15 Manual preview
OMNIPAGE 15
Brand: ScanSoft Pages: 94
JVC Blank Media LYT1015 Instructions Manual preview
Blank Media LYT1015
Brand: JVC Pages: 22
JVC ImageMixer 1.7 Instructions Manual preview
ImageMixer 1.7
Brand: JVC Pages: 43
JVC JLIP VIDEO CAPTURE Instructions Manual preview
JLIP VIDEO CAPTURE
Brand: JVC Pages: 56
JVC GR-DVL500U - Digital Camcorder Instructions Manual preview
GR-DVL500U - Digital Camcorder
Brand: JVC Pages: 72
JVC GZMG27US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG27US - Everio Camcorder - 680 KP
Brand: JVC Pages: 72
JVC GZ-MG77U - Everio Camcorder - 2.18 MP Instructions Manual preview
GZ-MG77U - Everio Camcorder - 2.18 MP
Brand: JVC Pages: 72
JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A Instructions Manual preview
Digital Photo Navigator ImageMixer with VCD LYT1116-001A
Brand: JVC Pages: 50
JVC GZMG21US - Everio Camcorder - 680 KP Instructions Manual preview
GZMG21US - Everio Camcorder - 680 KP
Brand: JVC Pages: 72
OneTouch Diabetes Management Software v2.2 Quick Reference Manual preview
Diabetes Management Software v2.2
Brand: OneTouch Pages: 13
F-SECURE MOBILE SECURITY 6 FOR ANDROID Manual preview
MOBILE SECURITY 6 FOR ANDROID
Brand: F-SECURE Pages: 22
Nikon DI series Manual (Install To Pc) preview
DI series
Brand: Nikon Pages: 12
FieldServer FS-8700-115 Instruction Manual preview
FS-8700-115
Brand: FieldServer Pages: 15

Brands by name

Popular brands

Load more brands