Sony Pro 10 User Manual Download Page 256

Page: 256 / 382

Specifying instruments

Choose

Send Program Changes

from the

MIDI Out

button (

) menu. A check mark appears adjacent to the command to indicate

that this option is turned on. If this option is turned off, patches cannot be switched.

From the

Voice

drop-down list, choose the new voice and click any key.

Note:

Patch names are arranged as specified in the General MIDI Standard. For synthesizers not using the General MIDI convention, use

the patch number instead of the instrument name.

Generating chords

You can also generate chords instead of single notes by choosing a chord structure from the keyboard’s

Note/Chord

drop-down list.

Chords are generated using the specified note as the root of the chord or interval.

250

CHAPTER 15

Summary of Contents for Pro 10































































































































































































































































































































































































Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands

Sony Pro 10, User Manual

Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands