Sony Pro 10 User Manual Download Page 175

Page: 175 / 382

Selecting a range of events

Hold the Shift key.

Click the first event that you want to select.

Click the last event that you want to select.

All events between the first and last selected events are selected.

Zooming events

To zoom an event, right-click the event and choose

Zoom Event

from the shortcut menu, or press Ctrl+Up Arrow. The event is zoomed

to fit the width of the data window.

Snapping to events

When snapping is enabled and you’re using the Event tool (

), you can choose to have events snap to other events in the data window.

From the

Options

menu, choose

Snapping

, and then choose

Events

from the submenu to toggle snapping to event edges.

Snap point indicator

For more information about snapping, see

Understanding snapping

on page

Tips:

• To turn snapping to events on and off, press Ctrl+Shift+F8.

• Hold the Shift key to temporarily override snapping.

USING THE EVENT TOOL

169

Summary of Contents for Pro 10































































































































































































































































































































































































Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands

Sony Pro 10, User Manual

Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands