Sony Pro 10, User Manual

Page: 174 / 382

Selecting events
When working with the Event tool ( ), you can select one or more events, but you cannot create time selections.
To select an event, click it.
Double-click an event to select it and adjust the loop bar to the length of the event.
Selecting events using menu commands
From the Edit menu, choose Event , and then choose Select Next Event or Select Previous Event from the submenu to select the next or
previous event in the data window.
Choose Extend to Next Event or Extend to Previous Event to extend the current selection to the next or previous event in the data
window.
Selecting events using keyboard shortcuts
You can use the following keyboard shortcuts to select events while using the Event tool:
Command Keyboard shortcut
Select the next event. Shift+Right Arrow
Select the previous event. Shift+Left Arrow
Extend the selection to the next event. Shift+Ctrl+Right Arrow
Extend the selection to the previous event. Shift+Ctrl+Left Arrow
Selecting multiple events
You can select multiple events in your project using two methods.
Selecting nonadjacent events
1.
Hold the Ctrl key.
2.
Select the events by clicking them.
To deselect an event, click it again to toggle the event selection on or off.
Selected events
168
| CHAPTER 10