Sony Pro 10 User Manual Download Page 127

Page: 127 / 382

Region tags

Inserting regions by dragging selections

One of the easiest ways to insert a region is to drag a selection from a data window into the Regions List.

Create a selection containing the opening drum roll in Fill.pca.

Drag the selection from the data window to the Regions List. The region is inserted.

Inserting regions using the time ruler shortcut

Create another selection in the waveform display.

Right-click the time ruler and choose

Insert Marker/Region

from the shortcut menu. The region is inserted.

Inserting regions using the keyboard

Create a selection in the waveform display.

Press R. The region is inserted and numbered region markers ( ) are placed at the start and end of the selected area.

Inserting regions automatically

In addition to the previously described methods, you can also insert regions automatically.

USING MARKERS, REGIONS, AND THE PLAYLIST/CUTLIST

121

Summary of Contents for Pro 10































































































































































































































































































































































































Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands

Sony Pro 10, User Manual

Search results

Summary of Contents for Pro 10

Reviews:

Related manuals for Pro 10

Brands by name

Popular brands