Setup Menu List
92
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
VF SET Menu
VF SET
Menu items
Subitems and setting values
Contents
VF
Setting the
viewfinder
Color
–99 to +99 (±
0
)
Adjust the color of pictures in the viewfinder.
Mode
Color
/ B&W
Select the display mode of the viewfinder.
Color: Color mode
B&W: Monochrome mode
Peaking
Setting the peaking
function for the
viewfinder
Type
Normal
/ Color / Both
Select the peaking type.
Normal: Normal peaking
Color: Color peaking
Both: “Normal” and “Color”
Peaking Frequency
Normal
/ High
Select the peaking frequency between “Normal” and “High”
when “Type” is set to “Normal.”
Color
White
/ Red / Yellow / Blue
When you select “Color” for “Type,” select the color of the
peaking signal.
Peaking Level
Low /
Mid
/ High
Set the color peaking level when “Type” is set to “Both.”
Marker
Setting the
markers added to
pictures on the
viewfinder screen
[M]
Setting
On
/ Off
Turn all marker indications on/off in combination.
Safety Zone
On
/ Off
Turn the safety marker on/off.
Safety Area
80% /
90%
/ 92.5% / 95%
Select the size (ratio to the entire screen) of the safety zone
marker.
Center Marker
On
/ Off
Turn the center marker on/off.
Aspect Marker
Line / Mask /
Off
Select the aspect marker.
Line: To show white lines
Mask: To lower the video signal level of areas outside the
marker range.
Off: To not display
Note
No aspect marker is displayed when a video format of EC
(Edge Crop) is selected in SD Mode.
Aspect Select
4:3
/ 13:9 / 14:9 / 15:9 / 1.66:1 /
1.85:1 / 2.35:1 / 2.4:1
Select the ratio of the aspect marker.
Aspect Mask
90% / 80% / 70% / 60% / 50% /
40% / 30% / 20% / 10% /
0%
When “Aspect Marker” is “Mask,” select the brightness of
images outside the aspect marker.
Guide Frame
On /
Off
Turn the guide frame marker on/off.
Summary of Contents for PMW300K1
Page 151: ......
