Setup Menu List
86
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
TLCS
Setting the Total
Level Control
System (auto
adjustment system
of gain, exposure
and shutter)
Level
+1.0 / +0.5 / ±
0
/ –0.5 / –1.0
Set the target level (to make brighter or darker) of auto iris
control in TLCS. (This setting also affects the gain control in
AGC mode and shutter-speed control in Auto Shutter mode.)
+1.0: Approx. one stop further open
+0.5: Approx. half a stop further open
±0: Standard
–0.5: Approx. half a stop further closed
–1.0: Approx. one stop further closed
Mode
Backlight /
Standard
/
Spotlight
Set the auto iris control mode in TLCS.
Backlight: Backlight mode to reduce darkening of the center
subject against lights
Standard: Standard mode
Spotlight: Spotlight mode to reduce blown-out highlights on
the center subject in the spotlight
Speed
–99 to +99 (
+50
)
Set the tracing speed of TLCS control.
AGC
On /
Off
Turn the AGC (Auto Gain Control) function on/off.
AGC Limit
3 / 6 / 9 /
12
/ 18 dB
Set the maximum gain in AGC.
AGC Point
F2.8
/ F4 / F5.6
Set the iris point for switching to auto-iris and AGC (Auto
Gain Control) control when AGC is on.
Auto Shutter
On /
Off
Turn the Auto Shutter control function on/off.
A.SHT Limit
1/100, 1/150, 1/200,
1/250
Set the maximum shutter speed in Auto Shutter control.
A.SHT Point
F5.6 / F8 / F11 /
F16
Set the exposure position for switching auto iris and auto
shutter control when Auto Shutter is on.
Shockless
White
Setting the
shockless white
balance
Off / 1 /
2
/ 3
Select the speed of change in white balance when the white
balance mode is switched. Set to “Off” to instantly change the
white balance.
Select a larger number to change the white balance more
slowly through interpolation.
White Switch
<B>
Setting for the
WHITE BAL
switch
ATW
/ MEM
Select the white balance adjustment mode selected at the B
position of the WHITE BAL switch.
ATW Speed
Setting for Auto
Tracing White
Balance
1 / 2 /
3
/ 4 / 5
Set the tracing speed of ATW. The larger the number you set,
the speed becomes faster.
ATW Mode
ATW mode setting
Natural
/ Pure
Natural: Depending on the brightness of scenes, automatically
adjusts the white balance to natural ambience.
Pure: Not leaving the blue color or red color, automatically
adjusts the white balance closer to original colors.
Wide
Conversion
Setting for use of a
wide-conversion
lens
On /
Off
Set to “On” when a wide-conversion lens is attached.
CAMERA SET
Menu items
Subitems and setting values
Contents
Summary of Contents for PMW300K1
Page 151: ......
