manualshive.com logo in svg

Sony PMW300K1, Operating Instructions Manual

Share
Download
Sony PMW300K1 Operating Instructions Manual Download Page 27

Adjusting the Lens

27

P

repa

ra

ti

ons

• When a non-exclusive lens is mounted for the 

first time, it may take about 20 seconds to start 
up the camcorder.

Attaching an exclusive lens

To attach the optional 1/2-inch EX Mount lens, 
proceed as follows:
The supplied lens once removed can also be 
mounted in the same manner.

1

Align the alignment pin of the lens with 
the recess at the top of the mount section 
of the camcorder and set the lens in 
place.

2

Turn the lens mount lever downward.

Attaching a Sony 1/2-inch Bayonet Mount 
lens

Use the optional lens adaptor.

1

Attach the lens adaptor to the 
camcorder.

1

Align the alignment pin of the lens 
adaptor with the recess at the top of the 
mount section and set the adaptor in 
place.

2

Turn the lens mount lever of the 
camcorder downward. (Keep the lens 
mount lever of the lens adaptor in the 
upper position.)

2

Attach the lens.

1

Align the alignment pin of the lens with 
the recess of the adaptor and set the lens 
in place.

2

Turn the lens mount lever of the adaptor 
downward.

Lens adaptor 
(not supplied)

Sony 1/2-inch Bayonet 
Mount lens (optional)

Summary of Contents for PMW300K1
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands