Setup Menu List
106
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
Properties
Execute / Cancel
Select “Execute” to display the detailed information of the
planning metadata loaded in the camcorder.
File Name: Filename
Assign ID: Assignment ID
Created: Time and date of creation
Modified: Time and date of most recent modification
Modified by: Name of person who modified the file
Title1: Title1 specified in file (clip name in ASCII format)
Title2: Title2 specified in file (clip name in UTF-8 format)
Material Gp: Number of material groups (groups of clips
recorded using the same planning metadata)
Shot Mark1: Name defined for Shot Mark 1
Shot Mark2: Name defined for Shot Mark 2
When you select “File Name,” “Assign ID,” “Title1,” or
“Title2” on the Planning Metadata Properties screen and then
press the SEL/SET button or the jog dial, the selected item is
displayed on the full screen, permitting you to check a long
file or clip name at a glance.
Note
Names of shot marks cannot be displayed on the full screen
even if you select “Shot Mark1” or “Shot Mark2.”
Clear
Execute / Cancel
Select “Execute” to clear the planning metadata loaded in the
camcorder.
Clip Name Disp
Title1 (ASCII)
/ Title2 (UTF-8)
Select the display mode of the clip name specified in planning
metadata.
Note
When both an ASCII format name and a UTF-8 format name
are specified in planning metadata, the UTF-8 format string is
used as the clip name. If only either ASCII-format name or
UTF-8 format name is specified in planning metadata, the
specified name is displayed regardless of the menu setting.
Network
Setting for
network
connections
Note
The IFU-WLM3
USB Wireless
LAN Module is
required.
This item is not
available when
using the CBK-
WA100 Wireless
Adapter.
DHCP
Enable /
Disable
Select whether to acquire the IP address automatically from a
DHCP server (“Enable”) or not (“Disable”).
IP Address
0.0.0.0 to 255.255.255.255
(
192.168.1.10
)
Set the IP address when “DHCP” is set to “Disable.”
Subnet Mask
0.0.0.0 to 255.255.255.255
(
255.255.255.0
)
Set the subnet mask when “DHCP” is set to “Disable.”
Default Gateway
0.0.0.0 to 255.255.255.255
(
0.0.0.0
)
Set the default gateway when “DHCP” is set to “Disable.”
User Name
(
admin
)
Set a desired user name in 1 to 31 alphanumeric characters.
Password
(
pmw-300
)
Sets a password in 0 to 31 alphanumeric characters.
Note
Each password character is displayed as “
*
”.
Set
Execute / Cancel
Confirms the “Network” settings.
Select “Execute” to confirm.
OTHERS
Menu items
Subitems and setting values
Contents
Summary of Contents for PMW300K1
Page 151: ......
