Setup Menu List
102
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
IR Remote
Activating/
deactivating the
Remote
Commander
On /
Off
Set to “On” to activate remote control operations from the
supplied IR Remote Commander.
Note
The setting automatically returns to “Off” when the
camcorder is turned off.
Battery Alarm
Setting the low
power alarm
Low BATT
5% /
10%
/ 15% / ... / 45% /
50%
Set the battery level at which the Low BATT warning is
generated (in steps of 5%).
BATT Empty
3% to 7% (
3%
)
Set the battery level at which the BATT Empty warning is
generated.
DC Low Volt1
11.5 V to 13.5 V (
11.5 V
)
Set the DC IN voltage at which the DC Low Volt1 warning is
generated.
DC Low Volt2
11.0 V to 12.0 V (
11.0 V
)
Set the DC IN voltage at which the DC Low Volt2 warning is
generated.
Battery INFO
Showing
information
regarding the
battery pack
(display only)
Type
The type (product name) is displayed.
MFG Date
The date of manufacture is displayed.
Charge Count
The accumulated number of times of charge/discharge is
displayed.
Capacity
The estimated total capacity of full charge is displayed.
Voltage
The current output voltage is displayed.
Remaining
The current remaining level is displayed.
Genlock
Setting Genlock
operation
H Phase (HD)
–999 to +999 (±
0
)
Set the H phase (phase of the horizontal sync signal) of HD
signal for Genlock operation.
H Phase (SD)
–99 to +99 (±
0
)
Set the H phase (phase of the horizontal sync signal) of SD
signal for Genlock operation.
Direct Menu
Setting the Direct
menu function
All /
Part
/ Off
All: All Direct menu operations are permitted.
Part: A part of Direct menu operations is permitted.
The
operation is limited depending on the GAIN, SHUTTER,
or WHITE BAL switch setting.
Off: No Direct menu operation is permitted.
Trigger Mode
Setting for
operating an
external recording
device connected
via the i.LINK
connector (FAT
only)
[M]
Internal /
Both
/ External
Internal: To activate recording start/stop operations only for
an SxS memory card in a built-in slot.
Both: To activate recording start/stop operations both for an
SxS memory card in a built-in slot and the external
recording device connected via the i.LINK connector.
External: To activate recording start/stop operations only for
the external recording device connected via the i.LINK
connector.
System
Country
NTSC Area / NTSC(J) Area /
PAL Area
Select the area of use and setup ON/OFF setting.
NTSC Area: Setup ON
NTSC(J) Area: Setup OFF
PAL Area: Setup OFF
Note
The default setting is different among the sales areas.
United States, Canada, and Brazil: “NTSC Area”
Other areas: “PAL Area”
OTHERS
Menu items
Subitems and setting values
Contents
Summary of Contents for PMW300K1
Page 151: ......
