Assigning Functions to Assignable Switches
146
Ch
apt
er 6 Men
u
and
Det
a
iled Set
tings
Note
Immediately after you assign a function to the ASSIGN. 2 switch or you switch the recording format, the setting of the
switch at that point may not match the camcorder’s internal state. After assigning a function, switch the ASSIGN. 2
switch or power the camcorder off and on again.
a) Immediately after you assign a functionThe OPERATION >Rec Function item in the setup menu is disabled (displayed
in grey) and cannot be set when the Picture Cache function is turned on.
Functions that can be Assigned to the ASSIGN. 2 Switch
Assignable switch setting Function
Off
No assignment
Front Mic
Switch between stereo and monaural when a stereo microphone is connected.
Marker
Turn the display of all markers on or off.
Picture Cache
a)
Turn the picture cache function on or off.
Zebra
Turn zebra display on or off.
Convergence Lock
Turn the convergence lock on or off.
Functions that can be Assigned to the ASSIGN. 1 and 3 Switches, the
ASSIGNABLE 4 and 5 Switches, and the COLOR TEMP. Button
Assignable switch setting Function
State when camcorder
is next powered on
Off
No assignment
—
Front Mic
Switch between stereo (On) and monaural (Off) when a
stereo microphone is connected.
Setting retained
Marker
Turn the display of all markers on or off.
Setting retained
Last Clip Delete
Delete the most recently recorded clip.
—
ATW
Turn ATW (auto tracing white balance) mode on or off.
Setting not retained
ATW Hold
Hold the white balance setting in the ATW mode.
—
EZ Mode
Execute EZ mode according to the setting of
OPERATION >TLCS.
Setting retained
Turbo Gain
Execute Turbo Gain according to the setting of
OPERATION >Gain Switch >Gain Turbo.
Setting not retained
Rec Review
Conduct a recording review.
—
Rec
Start or stop recording.
—
Picture Cache
Turn the picture cache function on or off.
Setting retained
Freeze Mix
Execute the freeze mix function.
Setting not retained
Spotlight
Turn the spotlight function in auto iris mode on or off.
Setting retained
Backlight
Turn the backlight function in auto iris mode on or off.
Setting retained
EVF Mode
Switch the viewfinder screen between B&W (On) and
color (Off).
Setting retained
BRT Disp
Turn the display of the brightness level on or off.
Setting retained
Histogram
Turn the histogram display on or off.
Setting retained
Lens Info
Turn the display of depth of field on or off.
Setting retained
Convergence Lock
Turn the convergence lock on or off.
Setting retained
Summary of Contents for PMW-TD300
Page 185: ......
