Sony PMW-500 Operation Manual Download | Manualshive

Page: 68 / 203

background image

Handling SxS Memory Cards

68

Ch
apt
er 4

S

hoo
tin

g

This camcorder records video and audio on SxS
memory cards (not supplied) loaded into one or
both of its memory card slots.

The PHU-120R Professional Harddisk Unit or
MEAD-MS01/SD01 Media Adaptor can also be
used for recording (when the recording mode is
FAT). For details, refer to the Supplement
supplied in the CD-ROM (labeled “Manuals for
Solid-State Memory Camcorder”).

SxS memory cards that can be used with
this camcorder

Use the following Sony SxS memory cards (SxS
PRO or SxS-1) with this camcorder.

SxS PRO

• SBP-16 (16 GB)
• SBP-32 (32 GB)

SxS-1

• SBS-32G1A (32 GB)
• SBS-64G1A (64 GB)

Proper operation cannot be guaranteed when
memory cards other than SxS PRO and SxS-1 are
used.

The memory cards listed above comply with the
ExpressCard memory card standard.
• SxS, SxS PRO and SxS-1 are trademarks of

Sony Corporation.

• The ExpressCard label and logo are property of

the Personal Computer Memory Card
International Association (PCMCIA) and are
licensed to Sony Corporation. Other trademarks
and trade names are the property of their
respective owners.

Notes on the use of SxS memory cards

• Recorded data may be lost or corrupted in the

following cases.
- When the camcorder is subjected to shock or

vibrations during reading, writing, or
formatting of an SxS memory card, and when
the camcorder is powered off or an SxS
memory card is removed during reading,
writing, or formatting

- When the camcorder is used in an

environment subject to static electricity or
electric noise

• Do not use or store SxS memory cards in

locations that are:
- Outside the specified environmental ranges
- Very hot, such in as vehicles parked in the sun

during summer, or exposed to direct sunlight,
or near heaters

- Subject to high humidity and corrosion

• When inserting a memory card, insert with the

label side facing the correct direction.

• Carry and store SxS memory cards in their

cases, and lock the cases securely.

• To use SxS-1 memory card “SBS-32G1” in

UDF mode, the software may need to be
updated. For details, access the Sony website
closest to your area. (Refer to the top page of the
CD-ROM Manual on the supplied CD-ROM.)

• Guard against accidents and inadvertent data

loss by backing up the data stored on SxS
memory cards. Sony cannot be responsible for
any consequences of damage to or loss of data
stored on SxS memory cards.

• Do not attach anything other than the supplied

labels in the designated label space. When
attaching a label, make sure it does not protrude
beyond the label space.

Chapter

4

Shooting

Handling SxS Memory
Cards

About SxS Memory Cards

«
...
66
67
68
69
70
...
»

Summary of Contents for PMW-500












































































































































































































Reviews:

No comments

Related manuals for PMW-500

ComfortTherm Series

Brand: sanowell Pages: 24

Brand: Thetford Pages: 33

Brand: ReelCraft Pages: 2

Brand: Reelcraft Industries, Inc. Pages: 4

Music and Circuit

Brand: Xavix Pages: 14

Brand: Pepperl+Fuchs Pages: 109

Brand: CD Automation Pages: 20

Bear Cat SC5627B

Brand: Echo Pages: 30

Brand: Echo Pages: 38

Freeview LZ2911STB-USB

Brand: Loranz Pages: 16

Brand: Aqua Medic Pages: 16

Brand: Broan Pages: 12

Brand: Husky Pages: 3

Brand: CAME Pages: 112

Brand: CAME Pages: 128

Brand: A&D Pages: 52

PHARO Aquafun 120 Comfort L 21114000

Brand: Hans Grohe Pages: 78

Brand: AEM Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands