Sony PLAYSTATION VR, Instruction Manual

Page: 14 / 60

14
Be sure to follow the instructions below to clean and maintain
your product.
• For safety reasons, unplug the AC power cord from the
electrical outlet and disconnect any other cables before
cleaning.
• Do not use solvents or other chemicals to clean the exterior
surfaces.
• Do not use a chemically-treated cleaning cloth to wipe the
product.
Processor unit exterior, VR headset exterior, head
supports, connectors
If they are dirty, wipe them with a soft, dry cloth.
Hint
If the connectors on the processor unit, AC power cord, or other
parts are dirty, signals may not be sent or received properly. You
may also experience noise or interruptions in the sound if the
connectors on the headphones or headset are dirty.
Lenses
Wipe only with a soft, dry cloth made specifically for cleaning
lenses. Do not use paper products such as paper towels, or
tissues not specifically intended for lenses.
Hint
Prolonged contact with water or dust may damage the lenses and
shorten their life.
Light shield
Remove the light shield from the VR headset and wash it with
water. Dry it completely with a soft cloth before reattaching it
to the headset.
Reattach the light shield by matching the nubs on the shield
to the 13 holes on the VR headset.
Vents
Remove dust build-up from the vents using a vacuum cleaner
or similar product.
Earpieces
Remove the earpieces from the stereo headphones and wash
them by hand with a mild detergent. Dry them completely
with a soft cloth before reattaching them to the headphones.
For details on removing the earpieces, refer to "Changing the
earpieces" (
page 13).
Care and cleaning
Light shield
VR headset